Register - Membership Terms
You are two steps away from becoming a member of Vintage Radio. First you must read everything on this page. It sets out what is currently available to members and sets out some basic rights and responsibilites you have as a member. The second step involves filling out the registration form which takes less than a minute.
Currently, reading content provided by Vintage Radio itself is normal content. Writing to the discussion forum or front page commentary is considered premium content and requires membership.
You agree that:
By clicking the "I agree" link below it is considered that you agree, without conditions or reservations, to everything above in its entirety and that you have the capacity to honour the agreement. If you disagree with or do not have the capacity to comply in full with the above then you must click the "I do not agree" link.
NOTE: Members are only entitled to ONE account. Any and all subsequent accounts will be closed, regardless of whether you have used them or not.
Time and Date
Official time: 10:28 (GMT + 10)
Vintage Radio and Television is proudly brought to you by an era where things were built with pride and made to last.
DISCLAIMER: Valve radios and televisions contain voltages that can deliver lethal shocks. You should not attempt to work on a valve radio or other valve equipment unless you know exactly what you are doing and have gained some experience with electronics and working around high voltages. The owner, administrators and staff of Vintage Radio will accept no liability for any damage, injury or loss of life that comes as a result of your use or mis-use of information on this website. Please read our Safety Warning before using this website.
WARNING: Under no circumstances should you ever apply power to a vintage radio, television or other old appliance you have acquired without first having it checked by an experienced person. Also, at no time should an appliance be connected to an electricity supply if the power cord is damaged. If in doubt, do not apply power.
Powered by Hansard V13.6