Vintage Gramophones and Phonographs
Forum home - Go back to Vintage Gramophones and Phonographs
|
Pye Black Box TS1
|
|
|
« Back ·
1 ·
Next »
|
|
|
Return to top of page · Post #: 1 · Written at 12:51:47 PM on 6 January 2020.
|
|
|
Location: Tailem Bend, SA
Member since 6 January 2020 Member #: 2400 Postcount: 3 |
|
I have a Pye Black Box All Transistor on the bench. I've fixed the amp stage and the record player, but has not sound on the radio. The only service info I've been able to find is a 3 page circuit, component layaout and an enlargement of the label that is inside the units. All 3 are for a TS1 Mk3. My unit is either a Mk1,2,4,5 or 6. Not a 3 as the component values and layout are incorrect. Does anyone have a circuit for any version other than a Mk 3. |
|
|
« Back ·
1 ·
Next »
|
|
|
You need to be a member to post comments on this forum.
|
|
Sign In
Vintage Radio and Television is proudly brought to you by an era where things were built with pride and made to last.
DISCLAIMER: Valve radios and televisions contain voltages that can deliver lethal shocks. You should not attempt to work on a valve radio or other electrical appliances unless you know exactly what you are doing and have gained some experience with electronics and working around high voltages. The owner, administrators and staff of Vintage Radio & Television will accept no liability for any damage, injury or loss of life that comes as a result of your use or mis-use of information on this website. Please read our Safety Warning before using this website.
WARNING: Under no circumstances should you ever apply power to a vintage radio, television or other electrical appliance you have acquired without first having it checked and serviced by an experienced person. Also, at no time should any appliance be connected to an electricity supply if the power cord is damaged. If in doubt, do not apply power.
Shintara - Keepin' It Real · VileSilencer - Maintain The Rage