Welcome to Australia's only Vintage Radio and Television discussion forums. You are not logged in. Please log in below, apply for an account or retrieve your password.
Australian Vintage Radio Forums
  Home  ·  About Us  ·  Discussion Forums  ·  Glossary  ·  Outside Links  ·  Policies  ·  Services Directory  ·  Safety Warnings  ·  Tutorials

Vintage Gramophones and Phonographs

Forum home - Go back to Vintage Gramophones and Phonographs

 Philips Turntables
« Back · 1 · Next »
 Return to top of page · Post #: 1 · Written at 3:40:20 PM on 27 January 2014.
Scotty's avatar
 Location: Melbourne, VIC
 Member since 26 December 2010
 Member #: 794
 Postcount: 230

Hi again,

For over 6 months I have been trying to track down some Philips turntables to either replace or repair a couple that I have.

If any of you are able to assist, please get in touch with me for further details.

Cheers in advance

Scott


 
 Return to top of page · Post #: 2 · Written at 12:21:31 PM on 1 February 2014.
Sue's avatar
 Sue
 Location: Daylesford, VIC
 Member since 13 January 2011
 Member #: 809
 Postcount: 266

Could you give us the model numbers of the turntables?


 
 Return to top of page · Post #: 3 · Written at 8:56:11 PM on 1 February 2014.
Scotty's avatar
 Location: Melbourne, VIC
 Member since 26 December 2010
 Member #: 794
 Postcount: 230

Hi there, mostly I'm looking for a model 22GC035 from 1966 or anything that would replace it.
Cheers
Scott


 
 Return to top of page · Post #: 4 · Written at 9:40:36 PM on 1 February 2014.
Marcc's avatar
 Location: Wangaratta, VIC
 Member since 21 February 2009
 Member #: 438
 Postcount: 2747

I had a Grundig recently in for overhaul It's turntable labeled Grundig was a Philips, that was suffering from lack of lubrication.


 
 Return to top of page · Post #: 5 · Written at 2:46:15 PM on 2 February 2014.
Scotty's avatar
 Location: Melbourne, VIC
 Member since 26 December 2010
 Member #: 794
 Postcount: 230

I meant to add, the other TT I'm after is a Philips AG1103-95. The one I have is missing the control arm that balances the record on the spindle


 
 Return to top of page · Post #: 6 · Written at 12:39:43 AM on 3 February 2014.
Marcc's avatar
 Location: Wangaratta, VIC
 Member since 21 February 2009
 Member #: 438
 Postcount: 2747

I copied the data on this: it was in a Grundig a/WE

AG1025W/07 and I copied its instruction sheet.

It was also missing the spindle, which I found under the platter, when I removed it......? The other one was taped to the cabinet. Loved the Asbestos in the tuner amp section.


 
 Return to top of page · Post #: 7 · Written at 1:52:53 PM on 8 February 2014.
Scotty's avatar
 Location: Melbourne, VIC
 Member since 26 December 2010
 Member #: 794
 Postcount: 230

Great, you were lucky to find the spindles... Very hard to find if they are missing. I'm still struggling with getting the small rubber grommets for the tone arm mounting bracket.


 
« Back · 1 · Next »
 You need to be a member to post comments on this forum.

Sign In

Username:
Password:
 Keep me logged in.
Do not tick box on a computer with public access.