Welcome to Australia's only Vintage Radio and Television discussion forums. You are not logged in. Please log in below, apply for an account or retrieve your password.
Australian Vintage Radio Forums
  Home  ·  About Us  ·  Discussion Forums  ·  Glossary  ·  Outside Links  ·  Policies  ·  Services Directory  ·  Safety Warnings  ·  Tutorials

Vintage Television

Forum home - Go back to Vintage Television

 Wanted: EKCO TC215
« Back · 1 · Next »
 Return to top of page · Post #: 1 · Written at 9:57:19 AM on 2 August 2025.
OliBHolmes's avatar
 OliBHolmes
 Location: Nuriootpa, SA
 Member since 28 June 2025
 Member #: 2734
 Postcount: 40

Hello all,

I'm not sure whether this fits here (I would put it in the dedicated "Wanted" section, but it is locked..)
(As in the title) I'm looking for an EKCO TC215, in preferably in a not-working condition.
If anyone has just the chassis and/or picture tube instead of the whole television, I'd be happy to take that too.
Budget of $60 - $100.

Thanks,
Oli.
 
 Return to top of page · Post #: 2 · Written at 6:23:03 PM on 12 September 2025.
OliBHolmes's avatar
 OliBHolmes
 Location: Nuriootpa, SA
 Member since 28 June 2025
 Member #: 2734
 Postcount: 40

Hello all,

Even if anyone has a spare chassis and 21" picture tube I'd be happy to take that!
Although I do say "spare chassis" like everyone just has one lying around...

Thanks,
Oli
 
 Return to top of page · Post #: 3 · Written at 7:49:41 PM on 15 September 2025.
Ian Robertson's Gravatar
 Ian Robertson
 Location: Belrose, NSW
 Member since 31 December 2015
 Member #: 1844
 Postcount: 2643

Oli, I have a spare 23" tube you could have.
Getting it to SA would be exy, tho.
If you want to make a frankinstein I have a complete HMV double-end lowboy cabinet that is taking up space in my garage.
It's the type with the pressed metal back. Front plastics are good.
 
 Return to top of page · Post #: 4 · Written at 3:03:50 PM on 17 September 2025.
OliBHolmes's avatar
 OliBHolmes
 Location: Nuriootpa, SA
 Member since 28 June 2025
 Member #: 2734
 Postcount: 40

I guess it depends whether it would fit! I'm sure we could figure out a price if I was to go ahead with a Frankenstein. Same with the chassis. Thankyou!

Oli
 
« Back · 1 · Next »
 You need to be a member to post comments on this forum.

Sign In

Username:
Password:
 Keep me logged in.
Do not tick box on a computer with public access.

Vintage Radio and Television is proudly brought to you by an era where things were built with pride and made to last.

DISCLAIMER: Valve radios and televisions contain voltages that can deliver lethal shocks. You should not attempt to work on a valve radio or other electrical appliances unless you know exactly what you are doing and have gained some experience with electronics and working around high voltages. The owner, administrators and staff of Vintage Radio & Television will accept no liability for any damage, injury or loss of life that comes as a result of your use or mis-use of information on this website. Please read our Safety Warning before using this website.

WARNING: Under no circumstances should you ever apply power to a vintage radio, television or other electrical appliance you have acquired without first having it checked and serviced by an experienced person. Also, at no time should any appliance be connected to an electricity supply if the power cord is damaged. If in doubt, do not apply power.

Shintara - Keepin' It Real · VileSilencer - Maintain The Rage