Vintage Television
Forum home - Go back to Vintage Television
|
Pye Pedigree T23 line output fault
|
|
|
Return to top of page · Post #: 16 · Written at 6:56:12 PM on 6 November 2023.
|
|
|
Location: Belrose, NSW
Member since 31 December 2015 Member #: 1844 Postcount: 2375 |
|
I don't know but I know who does. I'll email you with his contact details. |
|
|
Return to top of page · Post #: 17 · Written at 7:25:21 PM on 6 November 2023.
|
|
|
Location: Daylesford, VIC
Member since 13 January 2011 Member #: 809 Postcount: 326 |
|
Thanks, Ian. In the meantime, I've brushed a thin layer of Inox MX3 on the exposed areas of the coil wrapping. The coil's still holding up well. |
|
|
You need to be a member to post comments on this forum.
|
|
Sign In
Vintage Radio and Television is proudly brought to you by an era where things were built with pride and made to last.
DISCLAIMER: Valve radios and televisions contain voltages that can deliver lethal shocks. You should not attempt to work on a valve radio or other electrical appliances unless you know exactly what you are doing and have gained some experience with electronics and working around high voltages. The owner, administrators and staff of Vintage Radio & Television will accept no liability for any damage, injury or loss of life that comes as a result of your use or mis-use of information on this website. Please read our Safety Warning before using this website.
WARNING: Under no circumstances should you ever apply power to a vintage radio, television or other electrical appliance you have acquired without first having it checked and serviced by an experienced person. Also, at no time should any appliance be connected to an electricity supply if the power cord is damaged. If in doubt, do not apply power.
Shintara - Keepin' It Real · VileSilencer - Maintain The Rage