Welcome to Australia's only Vintage Radio and Television discussion forums. You are not logged in. Please log in below, apply for an account or retrieve your password.
Australian Vintage Radio Forums
  Home  ·  About Us  ·  Discussion Forums  ·  Glossary  ·  Outside Links  ·  Policies  ·  Services Directory  ·  Safety Warnings  ·  Tutorials

Vintage Television

Forum home - Go back to Vintage Television

 Help needed sourcing U.H.F. mixer diode
« Back · 1 · Next »
 Return to top of page · Post #: 1 · Written at 11:03:14 AM on 29 November 2022.
Labrat's avatar
 Location: Penrith, NSW
 Member since 7 April 2012
 Member #: 1128
 Postcount: 385

Hi Folks.

I have finally found out, what else, is wrong with the U.H.F rotary tuner in the Kriesler 59-01 television I'm working on.

From the damage I've found so far, it looks as though this set has had a
close encounter with lightning. Probably a proximity strike. Anyway I found the mixer diode to measure five ohms in each direction.
Another tuner I have here, its mixer diode measures a bit better.. Akin to a leaky diode. My last tuner, its diode measures good, although there is a short in the rotor/stator to be fixed.

What I need.

A source of SD82A or 1S750 diodes. Equivalents, haven't been able to find any. Research seems to indicate that Schottky diodes are now the go.

Surface mount diodes are not suitable as there are no radial leads to act as the input and output coils.

If you know a source of these diodes or an equivalent, please advise.

Wayne.


 
 Return to top of page · Post #: 2 · Written at 3:46:52 PM on 29 November 2022.
Labrat's avatar
 Location: Penrith, NSW
 Member since 7 April 2012
 Member #: 1128
 Postcount: 385

More research
.
A, 1SS -16 will do and probably a Phillips BA481, although its leads will need to be lengthened.

Wayne.


 
 Return to top of page · Post #: 3 · Written at 10:12:26 AM on 30 November 2022.
Ian Robertson's Gravatar
 Location: Belrose, NSW
 Member since 31 December 2015
 Member #: 1844
 Postcount: 2476

Did you try WES?

A 59-01 with a rotary UHF tuner? Now THAT'S a rare bird! Don't recall ever seeing one, and I did warranty service on them....


 
 Return to top of page · Post #: 4 · Written at 11:07:45 AM on 3 December 2022.
Labrat's avatar
 Location: Penrith, NSW
 Member since 7 April 2012
 Member #: 1128
 Postcount: 385

Hello All.
I have managed to find some 1SS86 diodes in China. Have ordered them and they ought to be here sometime in the next four to five weeks.

Being so small there can be no markings on the diodes, I will not know whether or not they are the genuine article until fitted in the tuner.

Wish me luck..

Wayne.


 
 Return to top of page · Post #: 5 · Written at 3:56:23 PM on 28 December 2022.
Morren's Gravatar
 Location: Killarney Vale, NSW
 Member since 19 March 2012
 Member #: 1112
 Postcount: 25

Thanks Wayne! It looks like the UHF is being a bugger. Glad you found some from O/S Smile


 
« Back · 1 · Next »
 You need to be a member to post comments on this forum.

Sign In

Username:
Password:
 Keep me logged in.
Do not tick box on a computer with public access.