Kriesler B/W television pictures
|
« Back ·
1 ·
Next »
|
|
|
Location: Lake Macquarie, NSW
Member since 1 April 2014
Member #: 1539
Postcount: 27
|
I used to have a old Kriesler set, here are a few pictures : what do you guys think ?.
|
|
|
|
Administrator
Location: Naremburn, NSW
Member since 15 November 2005
Member #: 1
Postcount: 7301
|
Tweeter, squawker and woofer. Doubt there is a telly made now that provides the full audio range inside the box now - at any price. Pushbutton tuning too. Did this set come with a remote control? I am sure some Krieslers did.
‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾
A valve a day keeps the transistor away...
|
|
|
|
Location: Silver City WI, US
Member since 10 May 2013
Member #: 1340
Postcount: 977
|
I think that is a Magnavox 6WR, (Wide Range 6" with whizzer cone) and a Magnavox 10". There was another Kriesler that had three Magnavox 10" at bottom, one with WR whizzer, these actually made some deep bass sounds.
|
|
|
|
Location: Gold Coast, QLD
Member since 28 June 2011
Member #: 942
Postcount: 23
|
That's one nice looking set!
Id love to have one like that for my small collection.
I actually have the wired remote control for a set I think like that one, its definitely branded Kriesler.
Some of my favourite radios and TVs are from around that era where innovations like motor drive tuning and magic eyes were popular.
|
|
|
|
Location: Ballarat, VIC
Member since 4 January 2011
Member #: 803
Postcount: 456
|
One of Kriesler's top of the range sets. Very well made and excellent performance.
|
|
|
|
Location: Daylesford, VIC
Member since 13 January 2011
Member #: 809
Postcount: 326
|
If I ever buy a Kriesler, it will be one like this, with the "computer" channel display. Electro-mechanical gimmickry at its finest!
|
|
|
|
Location: London, UK
Member since 23 December 2013
Member #: 1470
Postcount: 26
|
I had one of those once - a fine machine, with remote control and motorised channel change. Its a pity that feature is not usable now , however one connects the old TV to a digital signal!
|
|
|
|
Location: Penrith, NSW
Member since 7 April 2012
Member #: 1128
Postcount: 373
|
A nice set. The picture of the set from the rear, shows that one could select their choice of one of up to three different antennas.
Useful in areas like Ballarat. Before Aggregation, in Ballarat, one antenna pointed to Ballarat, one pointed to Bendigo, and one pointed to Melbourne.
Also, there are programming selectors, on the back of the tuner/motor assembly, used to set at which channels the tuner will stop, and at which ones the tuner will motor past.
The Gramophone style induction motor free-wheels in the stop mode and the rotor moves forward when spinning to engage the drive gears.
An odd fault that I had with one of these set in the 1970's was that the set had no picture, no raster.
I found that one of the contacts on the tuner was bent causing the picture mute function to remain on.
Aggregation. Now there's another story. I shall leave it up to others for now to relate their experiences of that time.
Wayne.
|
|
|
|
Location: Penrith, NSW
Member since 7 April 2012
Member #: 1128
Postcount: 373
|
I forgot to mention. Plastic castors on a 1960's TV. I don't think so.
Any castors would have been gold coloured metal ones. They would sometimes be damaged, bent, giving the "square wheel" effect.
Wayne.
|
|
|
|
Administrator
Location: Naremburn, NSW
Member since 15 November 2005
Member #: 1
Postcount: 7301
|
I had one of those once - a fine machine, with remote control and motorised channel change. Its a pity that feature is not usable now , however one connects the old TV to a digital signal!
It would use some power and take a bit of setting up (and probably cost a few bob too) but for a realistic usage of an old telly you could set up a mini MATV system with a bank of tuners and modulators to feed signals to an old telly on the correct channels.
‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾
A valve a day keeps the transistor away...
|
|
|
|
Location: Daylesford, VIC
Member since 13 January 2011
Member #: 809
Postcount: 326
|
Early 60s Astor TVs came equipped with single wheeled black plastic castors, and these broke very easily. I've changed the castors on my Plymouth to the stronger diecast type because there were only two of the plastic ones still intact.
|
|
« Back ·
1 ·
Next »
|
You need to be a member to post comments on this forum.
|