Welcome to Australia's only Vintage Radio and Television discussion forums. You are not logged in. Please log in below, apply for an account or retrieve your password.
Australian Vintage Radio Forums
  Home  ·  About Us  ·  Discussion Forums  ·  Glossary  ·  Outside Links  ·  Policies  ·  Services Directory  ·  Safety Warnings  ·  Tutorials

Vintage Television

Forum home - Go back to Vintage Television

 1960's HMV Trent half running, No vertical and no sound issues
« Back · 1 · Next »
 Return to top of page · Post #: 1 · Written at 11:02:56 AM on 4 February 2014.
Nathan Brown's Gravatar
 Location: East Maitland, NSW
 Member since 13 May 2013
 Member #: 1342
 Postcount: 243

The horizontal is working fine but there is no vertical and no sound. so anyone know any possible suspects?


‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾
"I'd rather have a CRT than nothing" - me
"people just throw working CRTs out, it is NOT FUNNY!" -me

 
 Return to top of page · Post #: 2 · Written at 7:29:58 PM on 4 February 2014.
Chris Ronayne's avatar
 Location: Wauchope, NSW
 Member since 1 January 2013
 Member #: 1269
 Postcount: 576

I've given you some suggestions about the audio fault previously - use a multimeter to test the speaker and audio transformer for open or shorted windings. Test each winding with a multimeter - set on the resistance setting. Write down the readings you get and which winding they are from, and post them here.

Do the same for the vertical coil on the deflection yoke.

Chris


 
« Back · 1 · Next »
 You need to be a member to post comments on this forum.

Sign In

Username:
Password:
 Keep me logged in.
Do not tick box on a computer with public access.