Vintage Television

Forum home - Go back to Vintage Television

Maxwell TV radiogram
« Back · 1 · 2 · Next »
Return to top of page · Post #: 16 · Written at 5:28:54 AM on 15 June 2019.
	Fred Lever Location: Toongabbie, NSW Member since 19 November 2015 Member #: 1828 Postcount: 1402
That is a nice looking well laid out chassis. Thank goodness there do not appear to be any wax capacitors! I note the transformers are also "next gen" windings (valve era) where a moulded bobbin system is used not layers of wax paper and crap wire. The electros also look like good candidates for careful reforming. The swing down chassis makes me sweat a bit about dropping it and jerking the looms on the tube neck. I wonder if there is a system to limit the angle? Looks like a good prospect to bring back to life. Nice cabinet as well and with a record player and radio what more could you want! Fred.

Return to top of page · Post #: 17 · Written at 6:30:53 AM on 15 June 2019.
	MonochromeTV Location: Melbourne, VIC Member since 20 September 2011 Member #: 1009 Postcount: 1262
1/07, maybe KGH (Titan) & not Precedent. I’ll check this out later this afternoon when I am back at home.

Return to top of page · Post #: 18 · Written at 1:55:03 PM on 15 June 2019.
	MonochromeTV Location: Melbourne, VIC Member since 20 September 2011 Member #: 1009 Postcount: 1262
Yes, it is a KGH 1/07. KGH 1-07 Circuit Diagram

Return to top of page · Post #: 19 · Written at 8:23:16 PM on 17 June 2019.
	Brad Administrator Location: Naremburn, NSW Member since 15 November 2005 Member #: 1 Postcount: 7612
Document uploaded to Post 18. ‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾ A valve a day keeps the transistor away...

Return to top of page · Post #: 20 · Written at 12:13:39 PM on 25 June 2019.
	Ian Robertson Location: Belrose, NSW Member since 31 December 2015 Member #: 1844 Postcount: 2693
KGH (KG Harris) 1.07 chassis. Looks like a later version, where they put back some of the parts they had stripped out in previous models... Not the tidiest build quality but quite serviceable none the less. No need to re-cap this chassis, it has Ducon polyesters. But if any of those white caps are UCC Hi-Qual 's, replace them, they are paper. White "Di-Pol" s are OK. Hor OP transformer (Philips NT3102) and cage is missing. These sets can work OK, I have circuit if u need. If you find a tranny and are keen, you should fit the EHT / width stabilisation circuit as is normal Philips practice. Check CRT first of course.

Return to top of page · Post #: 21 · Written at 3:02:21 PM on 6 July 2019.
	Daro Location: Tanawha, QLD Member since 22 December 2012 Member #: 1263 Postcount: 45
Looks like it also needs a NOS or salvaged flyback transformer as well.

Return to top of page · Post #: 22 · Written at 9:04:42 PM on 8 July 2019.
	Scotty Location: Melbourne, VIC Member since 26 December 2010 Member #: 794 Postcount: 401
Thanks very much folks for the information

Return to top of page · Post #: 23 · Written at 10:39:29 AM on 31 December 2025.
	OliBHolmes Location: Nuriootpa, SA Member since 28 June 2025 Member #: 2734 Postcount: 66
There is one very similar to this on FB Marketplace! The seller originally wanted $5,000!! And now has decreased it to a still extremely unreasonable $1,000! Listed as "Antique TV". https://www.facebook.com/marketplace/item/1533215564655747/?ref=search&referral_code=null&referral_story_type=post Oli

Return to top of page · Post #: 24 · Written at 9:28:50 AM on 5 January 2026.
	GTC Location: Sydney, NSW Member since 28 January 2011 Member #: 823 Postcount: 6936
And now has decreased it to a still extremely unreasonable $1,000! Tell him he's dreamin'

« Back · 1 · 2 · Next »
You need to be a member to post comments on this forum.

Vintage Television

Sign In