Welcome to Australia's only Vintage Radio and Television discussion forums. You are not logged in. Please log in below, apply for an account or retrieve your password.
Australian Vintage Radio Forums
  Home  ·  About Us  ·  Discussion Forums  ·  Glossary  ·  Outside Links  ·  Policies  ·  Services Directory  ·  Safety Warnings  ·  Tutorials

Member Introductions

Forum home - Go back to Member Introductions

 Newbie needs help
« Back · 1 · Next »
 Return to top of page · Post #: 1 · Written at 10:42:12 AM on 15 April 2012.
Justwedgeheads's Gravatar
 Justwedgeheads
 Location: Ballina, NSW
 Member since 11 March 2012
 Member #: 1108
 Postcount: 6

Hello,I have just purchased my first valve radio an awa radiola 539ma.It picks up many stations but has lots of background noise and no response to tone control.Ihave searched for a schematic with no luck.Can anyone help me?
I have been restoring pre 1978 pinball machines for many years and the radio matches well with these.I have found the pinball forums very good and have seen lots of good imformation here on vintage radio.
Cheers Ian
 
 Return to top of page · Post #: 2 · Written at 7:06:06 PM on 15 April 2012.
GTC's avatar
 GTC
 Location: Sydney, NSW
 Member since 28 January 2011
 Member #: 823
 Postcount: 6687

Welcome to the forum.

If you unhide your email address in your member profile, I'll send you the 539MA schematic and notes.

I suggest further discussion on the project would be better placed in the Tech Talk section, with AWA 539MA in the topic line. That will help future readers, too.
 
 Return to top of page · Post #: 3 · Written at 8:14:55 PM on 15 April 2012.
Justwedgeheads's Gravatar
 Justwedgeheads
 Location: Ballina, NSW
 Member since 11 March 2012
 Member #: 1108
 Postcount: 6

Thanks GTC I have un hidden my email.Many thanks in advance for schematic and tech notes.
 
 Return to top of page · Post #: 4 · Written at 8:35:42 PM on 15 April 2012.
GTC's avatar
 GTC
 Location: Sydney, NSW
 Member since 28 January 2011
 Member #: 823
 Postcount: 6687

Okay, sent.
 
 Return to top of page · Post #: 5 · Written at 5:39:41 AM on 16 April 2012.
Justwedgeheads's Gravatar
 Justwedgeheads
 Location: Ballina, NSW
 Member since 11 March 2012
 Member #: 1108
 Postcount: 6

Thanks for the supply of the imformation.It will make capacitor order much easier.
Ian
 
« Back · 1 · Next »
 You need to be a member to post comments on this forum.

Sign In

Username:
Password:
 Keep me logged in.
Do not tick box on a computer with public access.

Vintage Radio and Television is proudly brought to you by an era where things were built with pride and made to last.

DISCLAIMER: Valve radios and televisions contain voltages that can deliver lethal shocks. You should not attempt to work on a valve radio or other electrical appliances unless you know exactly what you are doing and have gained some experience with electronics and working around high voltages. The owner, administrators and staff of Vintage Radio & Television will accept no liability for any damage, injury or loss of life that comes as a result of your use or mis-use of information on this website. Please read our Safety Warning before using this website.

WARNING: Under no circumstances should you ever apply power to a vintage radio, television or other electrical appliance you have acquired without first having it checked and serviced by an experienced person. Also, at no time should any appliance be connected to an electricity supply if the power cord is damaged. If in doubt, do not apply power.

Shintara - Keepin' It Real · VileSilencer - Maintain The Rage