Member Introductions
Forum home - Go back to Member Introductions
|
New member
|
|
|
« Back ·
1 ·
Next »
|
|
|
Return to top of page · Post #: 1 · Written at 5:25:57 PM on 16 August 2024.
|
|
|
Location: Two Wells, SA
Member since 16 August 2024 Member #: 2672 Postcount: 33 |
|
Hi l'm John from Adelaide, just getting in to old radio hobby, I have always had an interest in old radios, I look forward to helping and being helped....I hope. |
|
|
Return to top of page · Post #: 2 · Written at 8:16:17 PM on 16 August 2024.
|
|
|
Location: Hill Top, NSW
Member since 18 September 2015 Member #: 1801 Postcount: 2078 |
|
Welcome to the group. Do you have a radio that needs service? |
|
|
« Back ·
1 ·
Next »
|
|
|
You need to be a member to post comments on this forum.
|
|
Sign In
Vintage Radio and Television is proudly brought to you by an era where things were built with pride and made to last.
DISCLAIMER: Valve radios and televisions contain voltages that can deliver lethal shocks. You should not attempt to work on a valve radio or other electrical appliances unless you know exactly what you are doing and have gained some experience with electronics and working around high voltages. The owner, administrators and staff of Vintage Radio & Television will accept no liability for any damage, injury or loss of life that comes as a result of your use or mis-use of information on this website. Please read our Safety Warning before using this website.
WARNING: Under no circumstances should you ever apply power to a vintage radio, television or other electrical appliance you have acquired without first having it checked and serviced by an experienced person. Also, at no time should any appliance be connected to an electricity supply if the power cord is damaged. If in doubt, do not apply power.
Shintara - Keepin' It Real · VileSilencer - Maintain The Rage