Welcome to Australia's only Vintage Radio and Television discussion forums. You are not logged in. Please log in below, apply for an account or retrieve your password.
Australian Vintage Radio Forums
  Home  ·  About Us  ·  Discussion Forums  ·  Glossary  ·  Outside Links  ·  Policies  ·  Services Directory  ·  Safety Warnings  ·  Tutorials

Member Introductions

Forum home - Go back to Member Introductions

 Coastal Radio Operator
« Back · 1 · Next »
 Return to top of page · Post #: 1 · Written at 4:35:23 AM on 30 September 2018.
John Mace's Gravatar
 John Mace
 Location: Perth, WA
 Member since 30 September 2018
 Member #: 2299
 Postcount: 1

Greetings everyone and thanks for the add.
I'm an ex Coastal Radio Operator, Worked for OTC Australia for 22 years.
Interested in all things HF Radio, Morse Code.
Bit of a collection from those years and may be selling off some of that from time to time.
Still have current Amateur Call - VK6JM. Not active at this point.
Look forward to posting and keeping up.


 
 Return to top of page · Post #: 2 · Written at 12:05:35 PM on 30 September 2018.
Ian Robertson's Gravatar
 Ian Robertson
 Location: Belrose, NSW
 Member since 31 December 2015
 Member #: 1844
 Postcount: 2370

QRB, John?
 
 Return to top of page · Post #: 3 · Written at 3:01:47 PM on 30 September 2018.
GTC's avatar
 GTC
 Location: Sydney, NSW
 Member since 28 January 2011
 Member #: 823
 Postcount: 6687

Welcome to V-R. There's a section for Vintage Amateur Radio, although it's not very busy.
 
 Return to top of page · Post #: 4 · Written at 3:27:03 PM on 30 September 2018.
Brad's avatar
 Brad
 Administrator
 Location: Naremburn, NSW
 Member since 15 November 2005
 Member #: 1
 Postcount: 7301

My guess is at least 4,000km. I'd encourage all radio amateurs here to try and have the occasional pow wow, especially if a VK2 can reach a VK6 and vice versa.


‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾
A valve a day keeps the transistor away...

 
 Return to top of page · Post #: 5 · Written at 6:44:24 PM on 30 September 2018.
Normf's Gravatar
 Normf
 Location: Cargo, NSW
 Member since 19 June 2018
 Member #: 2256
 Postcount: 96

Hi John
I'm am also ex OTC, worked at MRSC at Padington and LMS at Broadway.
I was there for about 22 years, left around 1991.
Good to contact another ex OTC
 
 Return to top of page · Post #: 6 · Written at 7:05:39 AM on 13 May 2019.
Dkneyle's Gravatar
 Dkneyle
 Location: Tathra, NSW
 Member since 12 April 2019
 Member #: 2347
 Postcount: 2

And another ex-OTC'er here as well. From the Technical Training School where I taught the satellite course in the 1980s.
 
« Back · 1 · Next »
 You need to be a member to post comments on this forum.

Sign In

Username:
Password:
 Keep me logged in.
Do not tick box on a computer with public access.

Vintage Radio and Television is proudly brought to you by an era where things were built with pride and made to last.

DISCLAIMER: Valve radios and televisions contain voltages that can deliver lethal shocks. You should not attempt to work on a valve radio or other electrical appliances unless you know exactly what you are doing and have gained some experience with electronics and working around high voltages. The owner, administrators and staff of Vintage Radio & Television will accept no liability for any damage, injury or loss of life that comes as a result of your use or mis-use of information on this website. Please read our Safety Warning before using this website.

WARNING: Under no circumstances should you ever apply power to a vintage radio, television or other electrical appliance you have acquired without first having it checked and serviced by an experienced person. Also, at no time should any appliance be connected to an electricity supply if the power cord is damaged. If in doubt, do not apply power.

Shintara - Keepin' It Real · VileSilencer - Maintain The Rage