Welcome to Australia's only Vintage Radio and Television discussion forums. You are not logged in. Please log in below, apply for an account or retrieve your password.
Australian Vintage Radio Forums
  Home  ·  About Us  ·  Discussion Forums  ·  Glossary  ·  Outside Links  ·  Policies  ·  Services Directory  ·  Safety Warnings  ·  Tutorials

Member Introductions

Forum home - Go back to Member Introductions

 Information on Murphy Stereogram
« Back · 1 · Next »
 Return to top of page · Post #: 1 · Written at 2:01:50 PM on 29 October 2014.
Kiwigirl's Gravatar
 Kiwigirl
 Location: Hervey Bay, QLD
 Member since 28 October 2014
 Member #: 1647
 Postcount: 5

Hello I'm hoping that some-one may be able to point me in the right direction to get parts to repair a MURPHY STEREOGRAM Mains Receiver Type SGS713 Made in NZ early sixties. We bought it to Australia from NZ but haven't been able to find parts. It belonged to my dad who bought it brand new from the factory. I don't have any manual which would help. I've been told I may need capacitors or transistors or even a coil. I live in HERVEY BAY 4655 QLD I joined yesterday hoping there is someone near to me that may be able to help or send me some info. Thanks, Kiwigirl
 
 Return to top of page · Post #: 2 · Written at 2:25:44 PM on 29 October 2014.
MonochromeTV's avatar
 MonochromeTV
 Location: Melbourne, VIC
 Member since 20 September 2011
 Member #: 1009
 Postcount: 1209

Kiwi Murphy radios were manufactured by Allied Industries, NZ under licence from Murphy Radio Limited in England. They were distributed by Fisher & Paykel of Lorne St. Auckland.

It could be based on a UK Murphy:
http://www.radio-workshop.co.uk/manuals.shtml.
http://www.radiomanuals.info/index.htm.

If no luck with UK models you might want to contact the New Zealand Vintage Radio Society:
http://www.nzvrs.pl.net/.
 
 Return to top of page · Post #: 3 · Written at 2:53:17 PM on 29 October 2014.
Kiwigirl's Gravatar
 Kiwigirl
 Location: Hervey Bay, QLD
 Member since 28 October 2014
 Member #: 1647
 Postcount: 5

Thanks Monochrome will check it out. Kiwigirl
 
« Back · 1 · Next »
 You need to be a member to post comments on this forum.

Sign In

Username:
Password:
 Keep me logged in.
Do not tick box on a computer with public access.

Vintage Radio and Television is proudly brought to you by an era where things were built with pride and made to last.

DISCLAIMER: Valve radios and televisions contain voltages that can deliver lethal shocks. You should not attempt to work on a valve radio or other electrical appliances unless you know exactly what you are doing and have gained some experience with electronics and working around high voltages. The owner, administrators and staff of Vintage Radio & Television will accept no liability for any damage, injury or loss of life that comes as a result of your use or mis-use of information on this website. Please read our Safety Warning before using this website.

WARNING: Under no circumstances should you ever apply power to a vintage radio, television or other electrical appliance you have acquired without first having it checked and serviced by an experienced person. Also, at no time should any appliance be connected to an electricity supply if the power cord is damaged. If in doubt, do not apply power.

Shintara - Keepin' It Real · VileSilencer - Maintain The Rage