Welcome to Australia's only Vintage Radio and Television discussion forums. You are not logged in. Please log in below, apply for an account or retrieve your password.
Australian Vintage Radio Forums
  Home  ·  About Us  ·  Discussion Forums  ·  Glossary  ·  Outside Links  ·  Policies  ·  Services Directory  ·  Safety Warnings  ·  Tutorials

Wanted and For Sale

Forum home - Go back to Wanted and for sale

 Guys I could really do with a Spindle off a Garrard RC 121 1958 -1960
« Back · 1 · Next »
 Return to top of page · Post #: 1 · Written at 10:06:14 PM on 13 February 2017.
Vintage Pete's avatar
 Vintage Pete
 Location: Albury, NSW
 Member since 1 May 2016
 Member #: 1919
 Postcount: 2048

Hi all,

Well after many hours of work I have fully restored my Garrard RC 121 mk2 , but the Spindle is damaged from the previous owner or repair man trying to remove it without removing the Drift first. A common mistake with the RC 121.

So mines all finished but I need the Spindle ,if you have one you could sell me or an old parts turntable,,, RC 121 mk2 that would be wonderful

This model was big in the USA, but they used a differant spindle than what we did here.

Thank you ,Pete
 
 Return to top of page · Post #: 2 · Written at 6:34:34 PM on 28 February 2017.
Vintage Pete's avatar
 Vintage Pete
 Location: Albury, NSW
 Member since 1 May 2016
 Member #: 1919
 Postcount: 2048

Please ignore this ad, I got one off ebay
So no longer needed.
Thank you,,pete
 
« Back · 1 · Next »
 You need to be a member to post comments on this forum.

Sign In

Username:
Password:
 Keep me logged in.
Do not tick box on a computer with public access.

Vintage Radio and Television is proudly brought to you by an era where things were built with pride and made to last.

DISCLAIMER: Valve radios and televisions contain voltages that can deliver lethal shocks. You should not attempt to work on a valve radio or other electrical appliances unless you know exactly what you are doing and have gained some experience with electronics and working around high voltages. The owner, administrators and staff of Vintage Radio & Television will accept no liability for any damage, injury or loss of life that comes as a result of your use or mis-use of information on this website. Please read our Safety Warning before using this website.

WARNING: Under no circumstances should you ever apply power to a vintage radio, television or other electrical appliance you have acquired without first having it checked and serviced by an experienced person. Also, at no time should any appliance be connected to an electricity supply if the power cord is damaged. If in doubt, do not apply power.

Shintara - Keepin' It Real · VileSilencer - Maintain The Rage