Welcome to Australia's only Vintage Radio and Television discussion forums. You are not logged in. Please log in below, apply for an account or retrieve your password.
Australian Vintage Radio Forums
  Home  ·  About Us  ·  Discussion Forums  ·  Glossary  ·  Outside Links  ·  Policies  ·  Services Directory  ·  Safety Warnings  ·  Tutorials

Wanted and For Sale

Forum home - Go back to Wanted and for sale

 Wanted old style TV wall plug.
« Back · 1 · Next »
 Return to top of page · Post #: 1 · Written at 11:15:54 PM on 30 May 2016.
Tallar Carl's avatar
 Tallar Carl
 Location: Latham, ACT
 Member since 21 February 2015
 Member #: 1705
 Postcount: 2174

I need one or two of these for one of my German radio antanae sockets. Do any of you have any spares or know where I can get some please?
I should be more specific it's for the ribbon cable and has two prongs.
 
 Return to top of page · Post #: 2 · Written at 12:10:30 AM on 31 May 2016.
GTC's avatar
 GTC
 Location: Sydney, NSW
 Member since 28 January 2011
 Member #: 823
 Postcount: 6761

300 ohm ribbon plug.

Wagner has them (Order Code: P521): http://www.wagneronline.com.au/300-ohm-plug/plugs/cables-connectors/p521-42150/967314/pd/
 
 Return to top of page · Post #: 3 · Written at 12:28:48 AM on 31 May 2016.
Tallar Carl's avatar
 Tallar Carl
 Location: Latham, ACT
 Member since 21 February 2015
 Member #: 1705
 Postcount: 2174

Oh cool thanks.
I just got online and ordered 4 of them thank you.
 
 Return to top of page · Post #: 4 · Written at 9:46:00 PM on 23 July 2016.
Labrat's avatar
 Labrat
 Location: Penrith, NSW
 Member since 7 April 2012
 Member #: 1128
 Postcount: 385

Just for the information of others, there were two differing plug types. One had smaller diameter pins, and I seem to remember they were spaced wider apart than the plug with the larger diameter pins.

I remember that some of the large pin plugs used insulation displacement connections. The feeder cable was slotted into position and the pins screwed into the feeder piercing the insulation and making the electrical contact.

Wayne
 
« Back · 1 · Next »
 You need to be a member to post comments on this forum.

Sign In

Username:
Password:
 Keep me logged in.
Do not tick box on a computer with public access.

Vintage Radio and Television is proudly brought to you by an era where things were built with pride and made to last.

DISCLAIMER: Valve radios and televisions contain voltages that can deliver lethal shocks. You should not attempt to work on a valve radio or other electrical appliances unless you know exactly what you are doing and have gained some experience with electronics and working around high voltages. The owner, administrators and staff of Vintage Radio & Television will accept no liability for any damage, injury or loss of life that comes as a result of your use or mis-use of information on this website. Please read our Safety Warning before using this website.

WARNING: Under no circumstances should you ever apply power to a vintage radio, television or other electrical appliance you have acquired without first having it checked and serviced by an experienced person. Also, at no time should any appliance be connected to an electricity supply if the power cord is damaged. If in doubt, do not apply power.

Shintara - Keepin' It Real · VileSilencer - Maintain The Rage