Welcome to Australia's only Vintage Radio and Television discussion forums. You are not logged in. Please log in below, apply for an account or retrieve your password.
Australian Vintage Radio Forums
  Home  ·  About Us  ·  Discussion Forums  ·  Glossary  ·  Outside Links  ·  Policies  ·  Services Directory  ·  Safety Warnings  ·  Tutorials

Wanted and For Sale

Forum home - Go back to Wanted and for sale

 30uF - 50uF Dual Electrolytic Capacitor Wanted
« Back · 1 · Next »
 Return to top of page · Post #: 1 · Written at 11:53:28 PM on 24 October 2012.
Airzone's Gravatar
 Airzone
 Location: Maclean, NSW
 Member since 30 May 2008
 Member #: 291
 Postcount: 341

I am after a 30μF - 50μF 150v Dual Electrolytic Capacitor for my Admiral valve clock radio model Y3559. Missed one on Ebay, does anyone know of a source or does anyone have one for sale please. I know I can replaced this with two singles, would like to keep it original.
 
 Return to top of page · Post #: 2 · Written at 12:11:32 AM on 25 October 2012.
Marcc's avatar
 Marcc
 Location: Wangaratta, VIC
 Member since 21 February 2009
 Member #: 438
 Postcount: 5254

Is that a chassis type, or an actual 3 wire double?

I would not use second hand, and replace every electrolytic if you are refurbishing it.

You can use higher voltage types.

If none of the locals like Evatco (did not see one there) (try also "Radio Waves" HRSA) do not have them you may have to try some one like Mouser (USA).

Marc


 
 Return to top of page · Post #: 3 · Written at 9:04:35 PM on 25 October 2012.
Airzone's Gravatar
 Airzone
 Location: Maclean, NSW
 Member since 30 May 2008
 Member #: 291
 Postcount: 341

Hi Marcc, it has a paper case with three solder pins at the base and filled with resin.
I guess it is just as easy to replace the single with two side by side. Just being pedantic.
Peter
 
 Return to top of page · Post #: 4 · Written at 9:47:00 PM on 25 October 2012.
MonochromeTV's avatar
 MonochromeTV
 Location: Melbourne, VIC
 Member since 20 September 2011
 Member #: 1009
 Postcount: 1182

If you want the exact values, this place in Canada has 30 & 50μF axials, 160v. Also check out their range of caps & values. I've bought from them before and have had no problems. From order to delivery took about 10 days.

http://www.justradios.com/cart.html

Cheers
 
 Return to top of page · Post #: 5 · Written at 10:47:15 PM on 25 October 2012.
Marcc's avatar
 Marcc
 Location: Wangaratta, VIC
 Member since 21 February 2009
 Member #: 438
 Postcount: 5254

That style of cap was not unusual, I have seen a higher voltage (not same value) type in some Krieslers.

Evatco have 33 & 47 μF at 450V others may have similar, or lower voltage?

Marc
 
« Back · 1 · Next »
 You need to be a member to post comments on this forum.

Sign In

Username:
Password:
 Keep me logged in.
Do not tick box on a computer with public access.

Vintage Radio and Television is proudly brought to you by an era where things were built with pride and made to last.

DISCLAIMER: Valve radios and televisions contain voltages that can deliver lethal shocks. You should not attempt to work on a valve radio or other electrical appliances unless you know exactly what you are doing and have gained some experience with electronics and working around high voltages. The owner, administrators and staff of Vintage Radio & Television will accept no liability for any damage, injury or loss of life that comes as a result of your use or mis-use of information on this website. Please read our Safety Warning before using this website.

WARNING: Under no circumstances should you ever apply power to a vintage radio, television or other electrical appliance you have acquired without first having it checked and serviced by an experienced person. Also, at no time should any appliance be connected to an electricity supply if the power cord is damaged. If in doubt, do not apply power.

Shintara - Keepin' It Real · VileSilencer - Maintain The Rage