Welcome to Australia's only Vintage Radio and Television discussion forums. You are not logged in. Please log in below, apply for an account or retrieve your password.
Australian Vintage Radio Forums
  Home  ·  About Us  ·  Discussion Forums  ·  Glossary  ·  Outside Links  ·  Policies  ·  Services Directory  ·  Safety Warnings  ·  Tutorials

Wanted and For Sale

Forum home - Go back to Wanted and for sale

 6M5 valves for sale
« Back · 1 · Next »
 Return to top of page · Post #: 1 · Written at 4:16:52 PM on 18 December 2011.
Brad's avatar
 Brad
 Administrator
 Location: Naremburn, NSW
 Member since 15 November 2005
 Member #: 1
 Postcount: 7301

I have three 6M5 power amplifier valves for sale due to them being surplus to requirements. These have not been run on a valve tester but have been 'smoke tested' for 20 minutes in an Airzone Cub and are thus known to be working.

Mullard and Philips 6M5 valves - Made in Australia


The outer two in the photo are made under the Mullard brand and the middle one is a Philips. These are rare, but highly sought after, valves and thus the price is a little higher than most other types.

The cost is $20.00 per valve which includes good packaging and registered express postage to anywhere in Australia. As the valves are used there will be no warranty unfortunately.

Interested members can reply in this thread to express interest and I will send an e-mail with payment details.


‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾
A valve a day keeps the transistor away...

 
 Return to top of page · Post #: 2 · Written at 4:42:19 PM on 17 February 2012.
Doug Shaw's Gravatar
 Doug Shaw
 Location: Birkdale, QLD
 Member since 16 February 2012
 Member #: 1089
 Postcount: 36

Brad
I am after a 6M5 to replace one in a HMV Little Nipper 61-51 I am restoring. Please advise how I can pay for one of them.
Doug Shaw
 
 Return to top of page · Post #: 3 · Written at 8:32:45 PM on 17 February 2012.
Brad's avatar
 Brad
 Administrator
 Location: Naremburn, NSW
 Member since 15 November 2005
 Member #: 1
 Postcount: 7301

G'day Doug,

I will test the valves in a going radio over the weekend and then send an e-mail with account details.


‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾
A valve a day keeps the transistor away...

 
 Return to top of page · Post #: 4 · Written at 8:41:02 PM on 21 March 2012.
Doug Shaw's Gravatar
 Doug Shaw
 Location: Birkdale, QLD
 Member since 16 February 2012
 Member #: 1089
 Postcount: 36

Brad
I wil pass on the purchase at this stage. Clearly you're busy, and I have ground out some result on the current valves. Keep valving.
Doug Shaw
 
« Back · 1 · Next »
 You need to be a member to post comments on this forum.

Sign In

Username:
Password:
 Keep me logged in.
Do not tick box on a computer with public access.

Vintage Radio and Television is proudly brought to you by an era where things were built with pride and made to last.

DISCLAIMER: Valve radios and televisions contain voltages that can deliver lethal shocks. You should not attempt to work on a valve radio or other electrical appliances unless you know exactly what you are doing and have gained some experience with electronics and working around high voltages. The owner, administrators and staff of Vintage Radio & Television will accept no liability for any damage, injury or loss of life that comes as a result of your use or mis-use of information on this website. Please read our Safety Warning before using this website.

WARNING: Under no circumstances should you ever apply power to a vintage radio, television or other electrical appliance you have acquired without first having it checked and serviced by an experienced person. Also, at no time should any appliance be connected to an electricity supply if the power cord is damaged. If in doubt, do not apply power.

Shintara - Keepin' It Real · VileSilencer - Maintain The Rage