Welcome to Australia's only Vintage Radio and Television discussion forums. You are not logged in. Please log in below, apply for an account or retrieve your password.
Australian Vintage Radio Forums
  Home  ·  About Us  ·  Discussion Forums  ·  Glossary  ·  Outside Links  ·  Policies  ·  Services Directory  ·  Safety Warnings  ·  Tutorials

Wanted and For Sale

Forum home - Go back to Wanted and for sale

 Extension for tone pot & Dial cord
« Back · 1 · Next »
 Return to top of page · Post #: 1 · Written at 11:59:45 PM on 26 November 2011.
Scotty's Gravatar
 Scotty
 Location: Melbourne, VIC
 Member since 26 December 2010
 Member #: 794
 Postcount: 387

Hi all,

Can anyone assist me with finding an extension shaft for a tone control I have for an old wirelss. I am also looking for some dial cord too if possible.

am based in Melbourne,

cheers
Scott
 
 Return to top of page · Post #: 2 · Written at 7:59:21 AM on 27 November 2011.
STC830's Gravatar
 STC830
 Location: NSW
 Member since 10 June 2010
 Member #: 681
 Postcount: 1302

Hello Scotty

There are couple of sites mentioned as extension shaft sources here:

http://vintage-radio.com.au/default.asp?f=3&th=255
 
 Return to top of page · Post #: 3 · Written at 9:37:57 AM on 27 November 2011.
Marcc's avatar
 Marcc
 Location: Wangaratta, VIC
 Member since 21 February 2009
 Member #: 438
 Postcount: 5389

I have seen these advertised at some ridiculous prices.

You have a choice of a one piece unit or a socket that takes a piece of 1/4" rod.

The latter is the most adaptable, especially with radio's like the Breville I have on the service bench. It has very long shafts and the volume pot had to be replaced.

RS components has some pots with long shafts.
They have sockets (solid shaft coupling 509-793)
WES components did have dial string?
Apart from trade outlets, Hobby shop may have the 1/4" rod.

I make my own, as required. Lathes do have their uses.

Marc
 
 Return to top of page · Post #: 4 · Written at 11:17:38 PM on 27 November 2011.
Scotty's Gravatar
 Scotty
 Location: Melbourne, VIC
 Member since 26 December 2010
 Member #: 794
 Postcount: 387

Thanks fellas - I'll let you know how I go
Cheers
 
 Return to top of page · Post #: 5 · Written at 9:41:01 PM on 28 November 2011.
Larry's Gravatar
 Larry
 Location: Mildura, VIC
 Member since 5 May 2011
 Member #: 896
 Postcount: 108

There is a seller on Ebay who has lots of dial cord ranging from 100 Meter Rolls to just 10 feet!
 
« Back · 1 · Next »
 You need to be a member to post comments on this forum.

Sign In

Username:
Password:
 Keep me logged in.
Do not tick box on a computer with public access.

Vintage Radio and Television is proudly brought to you by an era where things were built with pride and made to last.

DISCLAIMER: Valve radios and televisions contain voltages that can deliver lethal shocks. You should not attempt to work on a valve radio or other electrical appliances unless you know exactly what you are doing and have gained some experience with electronics and working around high voltages. The owner, administrators and staff of Vintage Radio & Television will accept no liability for any damage, injury or loss of life that comes as a result of your use or mis-use of information on this website. Please read our Safety Warning before using this website.

WARNING: Under no circumstances should you ever apply power to a vintage radio, television or other electrical appliance you have acquired without first having it checked and serviced by an experienced person. Also, at no time should any appliance be connected to an electricity supply if the power cord is damaged. If in doubt, do not apply power.

Shintara - Keepin' It Real · VileSilencer - Maintain The Rage