Welcome to Australia's only Vintage Radio and Television discussion forums. You are not logged in. Please log in below, apply for an account or retrieve your password.
Australian Vintage Radio Forums
  Home  ·  About Us  ·  Discussion Forums  ·  Glossary  ·  Outside Links  ·  Policies  ·  Services Directory  ·  Safety Warnings  ·  Tutorials

Wanted and For Sale

Forum home - Go back to Wanted and for sale

 Bosch volume pot.
« Back · 1 · Next »
 Return to top of page · Post #: 1 · Written at 12:42:08 PM on 13 November 2011.
DJ 46's Gravatar
 DJ 46
 Location: Gracemere, QLD
 Member since 28 August 2011
 Member #: 989
 Postcount: 26

Hello,
I'm looking to purchase a 500 k pot for a model 28/29 AC
Bosch table set,the pot has an extende shaft protruding from the back side this has a pulley fitted to enable pot to be operated via a cord fitted to a knob approximately 250 mm from pot.Hoping someone maybe of assistance.
Thanks Dave.


‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾
Dave

 
 Return to top of page · Post #: 2 · Written at 1:52:12 PM on 13 November 2011.
Marcc's avatar
 Marcc
 Location: Wangaratta, VIC
 Member since 21 February 2009
 Member #: 438
 Postcount: 5389

Is it Broken, dodgy, or missing?

If you cannot get ,as a replacement for one you have. Mark Oppatt in the US may well be able to refurbish it

Apparently he even does the old vintgage ones as well.

Marc
 
 Return to top of page · Post #: 3 · Written at 8:28:26 PM on 13 November 2011.
DJ 46's Gravatar
 DJ 46
 Location: Gracemere, QLD
 Member since 28 August 2011
 Member #: 989
 Postcount: 26

Dodgy, if unable to find one I Mark Oppatt contact details would be appreciated.

Dave.


‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾
Dave

 
 Return to top of page · Post #: 4 · Written at 9:05:55 PM on 13 November 2011.
GTC's avatar
 GTC
 Location: Sydney, NSW
 Member since 28 January 2011
 Member #: 823
 Postcount: 6761

http://www.oldradioparts.net/.
 
 Return to top of page · Post #: 5 · Written at 9:15:20 PM on 14 November 2011.
DJ 46's Gravatar
 DJ 46
 Location: Gracemere, QLD
 Member since 28 August 2011
 Member #: 989
 Postcount: 26

Thanks will email Mark and hopefully he may have something to suit or can repair.
Thanks for your help

Dave.


‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾
Dave

 
« Back · 1 · Next »
 You need to be a member to post comments on this forum.

Sign In

Username:
Password:
 Keep me logged in.
Do not tick box on a computer with public access.

Vintage Radio and Television is proudly brought to you by an era where things were built with pride and made to last.

DISCLAIMER: Valve radios and televisions contain voltages that can deliver lethal shocks. You should not attempt to work on a valve radio or other electrical appliances unless you know exactly what you are doing and have gained some experience with electronics and working around high voltages. The owner, administrators and staff of Vintage Radio & Television will accept no liability for any damage, injury or loss of life that comes as a result of your use or mis-use of information on this website. Please read our Safety Warning before using this website.

WARNING: Under no circumstances should you ever apply power to a vintage radio, television or other electrical appliance you have acquired without first having it checked and serviced by an experienced person. Also, at no time should any appliance be connected to an electricity supply if the power cord is damaged. If in doubt, do not apply power.

Shintara - Keepin' It Real · VileSilencer - Maintain The Rage