Wanted and For Sale
Forum home - Go back to Wanted and for sale
|
Wanted to buy Battery sockets
|
|
|
« Back ·
1 ·
Next »
|
|
|
Return to top of page · Post #: 1 · Written at 1:20:12 PM on 2 April 2019.
|
|
|
Location: Kanahooka, NSW
Member since 18 November 2016 Member #: 2012 Postcount: 712 |
|
I would like to buy the 2 pin and 3 pin battery sockets that would have been part of the A and B batteries 1.5 volt and 45 volt batteries. I dont expect there are any out there because no one would want to rip them out of the batteries anymore because these batteries are now collectable in their own right, however some may have been removed years ago when the old batteries would have been classed as rubbish. I was hoping not to cut off the original plugs from the radio. |
|
|
Return to top of page · Post #: 2 · Written at 5:59:18 PM on 2 April 2019.
|
|
|
Location: Latham, ACT
Member since 21 February 2015 Member #: 1705 Postcount: 2154 |
|
I actually solder leads onto the original plugs so I don't have to cut the plugs. |
|
|
Return to top of page · Post #: 3 · Written at 6:05:33 PM on 2 April 2019.
|
|
|
|
Location: Kanahooka, NSW
Member since 18 November 2016 Member #: 2012 Postcount: 712 |
|
Hi Carl. |
|
|
Return to top of page · Post #: 4 · Written at 6:12:54 PM on 2 April 2019.
|
|
|
|
Location: Latham, ACT
Member since 21 February 2015 Member #: 1705 Postcount: 2154 |
|
The battery eliminator kits that you can get from Silicon Chip are ideal for this as they have the correct fittings. |
|
|
Return to top of page · Post #: 5 · Written at 5:34:48 AM on 3 April 2019.
|
|
|
|
Location: Kanahooka, NSW
Member since 18 November 2016 Member #: 2012 Postcount: 712 |
|
I will have a look. Have not bought the magazine for a long time. Are they listed in the latest mag? |
|
|
Return to top of page · Post #: 6 · Written at 6:43:55 AM on 3 April 2019.
|
|
|
|
Location: Kanahooka, NSW
Member since 18 November 2016 Member #: 2012 Postcount: 712 |
|
Please disregard this add. I have changed what I was going to do. |
|
|
« Back ·
1 ·
Next »
|
|
|
You need to be a member to post comments on this forum.
|
|
Sign In
Vintage Radio and Television is proudly brought to you by an era where things were built with pride and made to last.
DISCLAIMER: Valve radios and televisions contain voltages that can deliver lethal shocks. You should not attempt to work on a valve radio or other electrical appliances unless you know exactly what you are doing and have gained some experience with electronics and working around high voltages. The owner, administrators and staff of Vintage Radio & Television will accept no liability for any damage, injury or loss of life that comes as a result of your use or mis-use of information on this website. Please read our Safety Warning before using this website.
WARNING: Under no circumstances should you ever apply power to a vintage radio, television or other electrical appliance you have acquired without first having it checked and serviced by an experienced person. Also, at no time should any appliance be connected to an electricity supply if the power cord is damaged. If in doubt, do not apply power.
Shintara - Keepin' It Real · VileSilencer - Maintain The Rage