Welcome to Australia's only Vintage Radio and Television discussion forums. You are not logged in. Please log in below, apply for an account or retrieve your password.
Australian Vintage Radio Forums
  Home  ·  About Us  ·  Discussion Forums  ·  Glossary  ·  Outside Links  ·  Policies  ·  Services Directory  ·  Safety Warnings  ·  Tutorials

Wanted and For Sale

Forum home - Go back to Wanted and for sale

 Wanted : information on cable
« Back · 1 · Next »
 Return to top of page · Post #: 1 · Written at 12:57:06 PM on 19 March 2018.
OldNerd's Gravatar
 OldNerd
 Location: Maitland, NSW
 Member since 16 May 2014
 Member #: 1574
 Postcount: 19

Several of my console radios need the lead from the chassis to the speaker replaced.

For many of these it's a 4 core cable

What is the consensus for replacing the cable?

Do I just use 4 core PVC and put up with it?
Can I buy 4 core 'cotton covered' cable - where??? {I looked and cant find any}
Do I buy some of the cotton sleeving that is available and 'hide' the PVC
4 individually cotton covered wires twisted together?

I know that it's not visible, but what is current "best practice"

Thanks in advance
 
 Return to top of page · Post #: 2 · Written at 1:22:52 PM on 19 March 2018.
GTC's avatar
 GTC
 Location: Sydney, NSW
 Member since 28 January 2011
 Member #: 823
 Postcount: 6761

Radiodaze in USA has 4-core and 5-core:

http://www.radiodaze.com/multi-conductor/

but I'm fairly sure someone local sells multi-core, too, just can't recall who at the minute.
 
 Return to top of page · Post #: 3 · Written at 1:47:17 PM on 19 March 2018.
Clive Durham's Gravatar
 Clive Durham
 Location: Grenfell, NSW
 Member since 8 July 2015
 Member #: 1771
 Postcount: 212

Tallar Carl has some. He is on this site


‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾
Clive

 
 Return to top of page · Post #: 4 · Written at 10:14:19 AM on 22 March 2018.
OldNerd's Gravatar
 OldNerd
 Location: Maitland, NSW
 Member since 16 May 2014
 Member #: 1574
 Postcount: 19


Thanks guys.

Smile
 
 Return to top of page · Post #: 5 · Written at 4:34:12 PM on 24 March 2018.
Tallar Carl's avatar
 Tallar Carl
 Location: Latham, ACT
 Member since 21 February 2015
 Member #: 1705
 Postcount: 2174

Yes mate I have the 4 core cotton covered here . My email is available.
 
« Back · 1 · Next »
 You need to be a member to post comments on this forum.

Sign In

Username:
Password:
 Keep me logged in.
Do not tick box on a computer with public access.

Vintage Radio and Television is proudly brought to you by an era where things were built with pride and made to last.

DISCLAIMER: Valve radios and televisions contain voltages that can deliver lethal shocks. You should not attempt to work on a valve radio or other electrical appliances unless you know exactly what you are doing and have gained some experience with electronics and working around high voltages. The owner, administrators and staff of Vintage Radio & Television will accept no liability for any damage, injury or loss of life that comes as a result of your use or mis-use of information on this website. Please read our Safety Warning before using this website.

WARNING: Under no circumstances should you ever apply power to a vintage radio, television or other electrical appliance you have acquired without first having it checked and serviced by an experienced person. Also, at no time should any appliance be connected to an electricity supply if the power cord is damaged. If in doubt, do not apply power.

Shintara - Keepin' It Real · VileSilencer - Maintain The Rage