Welcome to Australia's only Vintage Radio and Television discussion forums. You are not logged in. Please log in below, apply for an account or retrieve your password.
Australian Vintage Radio Forums
  Home  ·  About Us  ·  Discussion Forums  ·  Glossary  ·  Outside Links  ·  Policies  ·  Services Directory  ·  Safety Warnings  ·  Tutorials

Wanted and For Sale

Forum home - Go back to Wanted and for sale

 Idler Wheels and parts for Collaro Conquest Needed
« Back · 1 · Next »
 Return to top of page · Post #: 1 · Written at 1:53:02 PM on 13 October 2017.
Lazyday's Gravatar
 Lazyday
 Location: Glebe, NSW
 Member since 13 October 2017
 Member #: 2174
 Postcount: 2

Hi There!
I'm on the hunt for two idler wheels for my Collaro Conquest Radiogram.
They are both about 61mm in diameter- I can send a photo if required.
I was also hoping to replace the main plate which is cream enamel with red rubber as the rubber has deteriorated.
Does anyone have any of these parts or know anyone who is willing to sell them to me?
Thanks!
 
 Return to top of page · Post #: 2 · Written at 4:32:52 PM on 13 October 2017.
GTC's avatar
 GTC
 Location: Sydney, NSW
 Member since 28 January 2011
 Member #: 823
 Postcount: 6687

Try here: https://www.thevoiceofmusic.com/catalog/phono_wheels_turrets.asp
 
 Return to top of page · Post #: 3 · Written at 6:16:08 PM on 14 October 2017.
Lazyday's Gravatar
 Lazyday
 Location: Glebe, NSW
 Member since 13 October 2017
 Member #: 2174
 Postcount: 2

Thanks so much GTC- I'll have a look!
 
 Return to top of page · Post #: 4 · Written at 11:27:45 PM on 18 October 2017.
Viccadillac's Gravatar
 Viccadillac
 Location: Perth, WA
 Member since 7 May 2012
 Member #: 1140
 Postcount: 157

I'm on the hunt for two idler wheels for my Collaro Conquest Radiogram.

I have an old chap here who re rubbers the wheels if you have the old ones . Problem is you have to send them to him in Perth.

Cheers
 
« Back · 1 · Next »
 You need to be a member to post comments on this forum.

Sign In

Username:
Password:
 Keep me logged in.
Do not tick box on a computer with public access.

Vintage Radio and Television is proudly brought to you by an era where things were built with pride and made to last.

DISCLAIMER: Valve radios and televisions contain voltages that can deliver lethal shocks. You should not attempt to work on a valve radio or other electrical appliances unless you know exactly what you are doing and have gained some experience with electronics and working around high voltages. The owner, administrators and staff of Vintage Radio & Television will accept no liability for any damage, injury or loss of life that comes as a result of your use or mis-use of information on this website. Please read our Safety Warning before using this website.

WARNING: Under no circumstances should you ever apply power to a vintage radio, television or other electrical appliance you have acquired without first having it checked and serviced by an experienced person. Also, at no time should any appliance be connected to an electricity supply if the power cord is damaged. If in doubt, do not apply power.

Shintara - Keepin' It Real · VileSilencer - Maintain The Rage