Tech Talk

Forum home - Go back to Tech talk

Kriesler 11-25 table gram
« Back · 1 · 2 · Next »
Return to top of page · Post #: 16 · Written at 5:35:08 PM on 3 May 2018.
	Jimb Location: Kanahooka, NSW Member since 18 November 2016 Member #: 2012 Postcount: 712
Hello MonochromeTV. I will check it out. As I mentioned while it works I will leave it al one. Regards Jim

Return to top of page · Post #: 17 · Written at 9:53:21 PM on 3 May 2018.
	Marcc Location: Wangaratta, VIC Member since 21 February 2009 Member #: 438 Postcount: 5254
Just a note on the Philips its a 2462, the cartridge is fed to the top of the volume control (switched), but is solid wired as it cannot be earthed. It actually has a 50K (R22) resistor across it & is fed to the Volume pot via a 0.004mfd (C40) series cap. Marc

Return to top of page · Post #: 18 · Written at 11:11:40 AM on 4 May 2018.
	Flakes Location: Adelaide, SA Member since 27 February 2010 Member #: 630 Postcount: 392
I have 2 of these in the shed awaiting a moment of inspiration. I asked a while ago in another forum if anyone had any details of the decks used and weather there was one for Microgrove (33 1/3 RPM)? If I got one that suited then id be more interested to fix them up, Have one fully original with the 78 RPM deck and then the one I use with the Microgroove. Dan ‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾ Valve radios, They just don't make them like they used to

Return to top of page · Post #: 19 · Written at 7:29:45 AM on 5 May 2018.
	Brad Administrator Location: Naremburn, NSW Member since 15 November 2005 Member #: 1 Postcount: 7303
Photos uploaded. ‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾ A valve a day keeps the transistor away...

Return to top of page · Post #: 20 · Written at 9:36:43 AM on 7 May 2018.
	Jimb Location: Kanahooka, NSW Member since 18 November 2016 Member #: 2012 Postcount: 712
Thanks Monochrome TV. I have some coming on ebay .However while this one continues to work I will leave it alone. Still trying to buy another, then I can be a bit more adventurous . Regards Jimb

Return to top of page · Post #: 21 · Written at 9:41:37 AM on 7 May 2018.
	Jimb Location: Kanahooka, NSW Member since 18 November 2016 Member #: 2012 Postcount: 712
Thanks Monochrome TV. I have ordered some on EBay.However while this one is working I will leave it alone. I am trying to buy one ,then I can be more adventurous. Regards Jimb

Return to top of page · Post #: 22 · Written at 8:51:24 AM on 8 May 2018.
	Jimb Location: Kanahooka, NSW Member since 18 November 2016 Member #: 2012 Postcount: 712
Hello Monochrome TV. I have ordered some rubber on eBay. However will not disturb this on while it works. If I am fortunate enough to buy another and it needs surgery I will have a got at that one. Regards Jimb

Return to top of page · Post #: 23 · Written at 8:54:33 AM on 8 May 2018.
	Jimb Location: Kanahooka, NSW Member since 18 November 2016 Member #: 2012 Postcount: 712
Sorry about the posts I duplicated did not see it had rolled over to a second page and could not understand why my posts disappeared.

« Back · 1 · 2 · Next »
You need to be a member to post comments on this forum.

Tech Talk

Sign In