Welcome to Australia's only Vintage Radio and Television discussion forums. You are not logged in. Please log in below, apply for an account or retrieve your password.
Australian Vintage Radio Forums
  Home  ·  About Us  ·  Discussion Forums  ·  Glossary  ·  Outside Links  ·  Policies  ·  Services Directory  ·  Safety Warnings  ·  Tutorials

Tech Talk

Forum home - Go back to Tech talk

 Seeking Kriesler schematics
« Back · 1 · Next »
 Return to top of page · Post #: 1 · Written at 9:25:47 AM on 18 July 2016.
GBR's Gravatar
 GBR
 Location: Gladstone, QLD
 Member since 15 May 2016
 Member #: 1925
 Postcount: 34

Hi guys,

I am chasing Kriesler schematics that incorporate the following valve layout:

12AX7, 6V4, 6N8, 6AN7A, 6M5 and 6M5

Power transformer dated 1968

2 x OTs rated at 7000 ohm primary and 15 ohm secondary

I have found the 11-98 schematic which is close but not a match

Cheer

Gary
 
 Return to top of page · Post #: 2 · Written at 10:01:13 AM on 18 July 2016.
Flakes's avatar
 Flakes
 Location: Adelaide, SA
 Member since 27 February 2010
 Member #: 630
 Postcount: 392

Hi Gary

I would be looking at the 11-99A, 11-104 and the 11-109. The service diagram states all that you have mentioned there.

See Kevin's website he has the diagrams there:

http://www.kevinchant.com/11--series.html


‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾
Valve radios, They just don't make them like they used to

 
 Return to top of page · Post #: 3 · Written at 6:24:41 PM on 1 August 2016.
GBR's Gravatar
 GBR
 Location: Gladstone, QLD
 Member since 15 May 2016
 Member #: 1925
 Postcount: 34

Thank you Flakes, I looked at kevins page initially but missed that one. Sorry for the late reply
 
« Back · 1 · Next »
 You need to be a member to post comments on this forum.

Sign In

Username:
Password:
 Keep me logged in.
Do not tick box on a computer with public access.

Vintage Radio and Television is proudly brought to you by an era where things were built with pride and made to last.

DISCLAIMER: Valve radios and televisions contain voltages that can deliver lethal shocks. You should not attempt to work on a valve radio or other electrical appliances unless you know exactly what you are doing and have gained some experience with electronics and working around high voltages. The owner, administrators and staff of Vintage Radio & Television will accept no liability for any damage, injury or loss of life that comes as a result of your use or mis-use of information on this website. Please read our Safety Warning before using this website.

WARNING: Under no circumstances should you ever apply power to a vintage radio, television or other electrical appliance you have acquired without first having it checked and serviced by an experienced person. Also, at no time should any appliance be connected to an electricity supply if the power cord is damaged. If in doubt, do not apply power.

Shintara - Keepin' It Real · VileSilencer - Maintain The Rage