Welcome to Australia's only Vintage Radio and Television discussion forums. You are not logged in. Please log in below, apply for an account or retrieve your password.
Australian Vintage Radio Forums
  Home  ·  About Us  ·  Discussion Forums  ·  Glossary  ·  Outside Links  ·  Policies  ·  Services Directory  ·  Safety Warnings  ·  Tutorials

Tech Talk

Forum home - Go back to Tech talk

 Tasma Schematic
« Back · 1 · Next »
 Return to top of page · Post #: 1 · Written at 11:54:56 PM on 21 February 2006.
Tangfish's Gravatar
 Tangfish
 Location: Brisbane, QLD
 Member since 7 January 2006
 Member #: 12
 Postcount: 28

Hello Brad and others,
I have just acquired a Tasma like the one second from the bottom or the right sidebar over there.

Am wondering if anyone might habve a scematic for it.
It seems there may be a few model numbers inside the same shell... I always understood this model to be the 1001 or "Baby" but a quick look over the chassis found me a serial number and what might be a model number which was 1007. A later model perhaps?

If it is a later model, any idea about the age and what's different from the 1001??

Tahnsk for your help.
 
 Return to top of page · Post #: 2 · Written at 3:12:59 PM on 23 February 2006.
Tangfish's Gravatar
 Tangfish
 Location: Brisbane, QLD
 Member since 7 January 2006
 Member #: 12
 Postcount: 28

Update, I looked again and it's 1005 not 1007. Doh!
 
 Return to top of page · Post #: 3 · Written at 11:29:31 PM on 27 February 2006.
Brad's avatar
 Brad
 Administrator
 Location: Naremburn, NSW
 Member since 15 November 2005
 Member #: 1
 Postcount: 7395

I'll have a look around and see what I can come up with as I don't have many schematics myself.


‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾
A valve a day keeps the transistor away...

 
 Return to top of page · Post #: 4 · Written at 12:53:49 PM on 28 February 2006.
Tangfish's Gravatar
 Tangfish
 Location: Brisbane, QLD
 Member since 7 January 2006
 Member #: 12
 Postcount: 28

Not to worry Brad, I think I've got a line on one now anyways.

Cheers
 
 Return to top of page · Post #: 5 · Written at 9:10:33 PM on 8 October 2007.
tore's Gravatar
 tore
 Location: NOT SUPPLIED
 Member since 8 October 2007
 Member #: 179
 Postcount: 5

Hi Tangfish
I have got the same radio and need a circuit diargram as well, can you tell me where you got it from
cheers
 
« Back · 1 · Next »
 You need to be a member to post comments on this forum.

Sign In

Username:
Password:
 Keep me logged in.
Do not tick box on a computer with public access.

Vintage Radio and Television is proudly brought to you by an era where things were built with pride and made to last.

DISCLAIMER: Valve radios and televisions contain voltages that can deliver lethal shocks. You should not attempt to work on a valve radio or other electrical appliances unless you know exactly what you are doing and have gained some experience with electronics and working around high voltages. The owner, administrators and staff of Vintage Radio & Television will accept no liability for any damage, injury or loss of life that comes as a result of your use or mis-use of information on this website. Please read our Safety Warning before using this website.

WARNING: Under no circumstances should you ever apply power to a vintage radio, television or other electrical appliance you have acquired without first having it checked and serviced by an experienced person. Also, at no time should any appliance be connected to an electricity supply if the power cord is damaged. If in doubt, do not apply power.

Shintara - Keepin' It Real · VileSilencer - Maintain The Rage