Tech Talk
Forum home - Go back to Tech talk
|
Dial bulbs
|
|
|
« Back ·
1 ·
Next »
|
|
|
Return to top of page · Post #: 1 · Written at 5:15:15 PM on 11 April 2014.
|
|
|
Location: Hobart, TAS
Member since 11 April 2014 Member #: 1548 Postcount: 4 |
|
Hi everyone ,I am looking to buy a couple of dial bulbs |
|
|
Return to top of page · Post #: 2 · Written at 6:08:59 PM on 11 April 2014.
|
|
|
Location: Blue Mountains, NSW
Member since 10 March 2013 Member #: 1312 Postcount: 401 |
|
I think that should be 0.32A, 32A would light up a room twice over |
|
|
Return to top of page · Post #: 3 · Written at 3:57:14 AM on 18 April 2014.
|
|
|
Location: Perth, WA
Member since 7 May 2012 Member #: 1140 Postcount: 157 |
|
Try Flamingo records in Hobart, Erwin stocks all the bulbs and other items . |
|
|
« Back ·
1 ·
Next »
|
|
|
You need to be a member to post comments on this forum.
|
|
Jaycar sells a good 250 mA replacement.
Sign In
Vintage Radio and Television is proudly brought to you by an era where things were built with pride and made to last.
DISCLAIMER: Valve radios and televisions contain voltages that can deliver lethal shocks. You should not attempt to work on a valve radio or other electrical appliances unless you know exactly what you are doing and have gained some experience with electronics and working around high voltages. The owner, administrators and staff of Vintage Radio & Television will accept no liability for any damage, injury or loss of life that comes as a result of your use or mis-use of information on this website. Please read our Safety Warning before using this website.
WARNING: Under no circumstances should you ever apply power to a vintage radio, television or other electrical appliance you have acquired without first having it checked and serviced by an experienced person. Also, at no time should any appliance be connected to an electricity supply if the power cord is damaged. If in doubt, do not apply power.
Shintara - Keepin' It Real · VileSilencer - Maintain The Rage