Welcome to Australia's only Vintage Radio and Television discussion forums. You are not logged in. Please log in below, apply for an account or retrieve your password.
Australian Vintage Radio Forums
  Home  ·  About Us  ·  Discussion Forums  ·  Glossary  ·  Outside Links  ·  Policies  ·  Services Directory  ·  Safety Warnings  ·  Tutorials

Tech Talk

Forum home - Go back to Tech talk

 Mullard 10 10
« Back · 1 · Next »
 Return to top of page · Post #: 1 · Written at 1:09:51 PM on 14 August 2008.
Hugh's Gravatar
 Hugh
 Location: Tallangatta, VIC
 Member since 14 August 2008
 Member #: 339
 Postcount: 5

Does anyone have a circuit for this Amp? It was PP 6GW8 in Ultralinear driven by EF86 and I think built in ceramic PU equalisation, all on a phenolic PC board.
I am just being lazy looking here first before tracing out the circuit and restoring.
This amp - a stereo pair on home made chassis - is in excellent condition with the good A&R transformers.
Cheers, and hello to you all
Hugh


‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾
Hugh

 
 Return to top of page · Post #: 2 · Written at 2:10:12 AM on 17 October 2008.
radiola49's Gravatar
 radiola49
 Location: Maryborough, VIC
 Member since 8 December 2007
 Member #: 204
 Postcount: 36

I am sure I have a Mullard publication on their 10-10 Amplifier, as many years ago my late father was keen to build one then stereo became the thing and it didn't happen. Pretty sure it didn't embrace PCB's but then some constructors/manufacturers may have adopted that approach.
 
 Return to top of page · Post #: 3 · Written at 10:05:35 PM on 1 January 2009.
Banjo's Gravatar
 Banjo
 Location: Richmond, NSW
 Member since 1 January 2009
 Member #: 406
 Postcount: 5

I Have a circuit & some other details on the Mullard Ten Ten
using Pcbs It has 4 6GW8 & 2 EF86 , 5AR4 Rectifier If you are interested
 
 Return to top of page · Post #: 4 · Written at 10:17:05 AM on 12 March 2009.
Hugh's Gravatar
 Hugh
 Location: Tallangatta, VIC
 Member since 14 August 2008
 Member #: 339
 Postcount: 5

Banjo - Great, could you scan the circuit diagram and email it? Much appreciated. hupa at bigpond dot com
PS - I played banjo for a while - great instrument!


‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾
Hugh

 
« Back · 1 · Next »
 You need to be a member to post comments on this forum.

Sign In

Username:
Password:
 Keep me logged in.
Do not tick box on a computer with public access.

Vintage Radio and Television is proudly brought to you by an era where things were built with pride and made to last.

DISCLAIMER: Valve radios and televisions contain voltages that can deliver lethal shocks. You should not attempt to work on a valve radio or other electrical appliances unless you know exactly what you are doing and have gained some experience with electronics and working around high voltages. The owner, administrators and staff of Vintage Radio & Television will accept no liability for any damage, injury or loss of life that comes as a result of your use or mis-use of information on this website. Please read our Safety Warning before using this website.

WARNING: Under no circumstances should you ever apply power to a vintage radio, television or other electrical appliance you have acquired without first having it checked and serviced by an experienced person. Also, at no time should any appliance be connected to an electricity supply if the power cord is damaged. If in doubt, do not apply power.

Shintara - Keepin' It Real · VileSilencer - Maintain The Rage