Hi.

This unit consists of a radio, record player, reel-to-reel tape deck and television. I need a schematic to help me trace wiring in the loom between the radio and tape deck.

A schematic of a Precedent 3 in 1 which includes the tape deck would be adequate.

Thank You.

Henry

Hello.

I think I might have what you are after. It is a circuit for a Precedent Model 963 Tape Stereogram. It does not have the TV circuit, but switch 3A, position 3 goes to TV. The valve line-up is as follows: 6BE6, 6N8, 6BM8 X 3, 6V4, 12AX7 & EM84 magic-eye. I also have some Precedent TV circuits as well. So if you can provide some model numbers and valve line-up I can send you some circuits.

Cheers.

Hi,

Thank you very much for the fast response. All I have with me is the Radio/Tape Deck assembly. There is no model number on it, and there is no model number anywhere on the cabinet. I had a look at a picture of the 3 in 1 with a tape deck, though, and it does look identical to that assembly I have. The valve lineup is identical. I don't need the television schematic. All I want to verify is the wiring in the loom from the tape deck which plugs into the rear of the radio.

Can you please contact me on mydhengmail.com

Thank You

Henry

Thank you very much for sending me the diagram, Monochrome625. It helps me immensely.

Henry

You're most welcome. Glad to of been able to help you.
Cheers.