Welcome to Australia's only Vintage Radio and Television discussion forums. You are not logged in. Please log in below, apply for an account or retrieve your password.
Australian Vintage Radio Forums
  Home  ·  About Us  ·  Discussion Forums  ·  Glossary  ·  Outside Links  ·  Policies  ·  Services Directory  ·  Safety Warnings  ·  Tutorials

Tech Talk

Forum home - Go back to Tech talk

 Realistic AX 190 20-5155 (Circa 1972) Comms.
« Back · 1 · Next »
 Return to top of page · Post #: 1 · Written at 10:59:20 PM on 23 January 2011.
Marcc's avatar
 Marcc
 Location: Wangaratta, VIC
 Member since 21 February 2009
 Member #: 438
 Postcount: 5254

This is a sea change, for me, it's got transistors in it.

This one has been butchered around Q4 (RF input Board). It was apparently bought at swap with no books etc.

I need photo's of the top & bottom (particularly) of the board, in that area to see what else was attached and confirm, my guess as to what pieces of the printed circuit are missing.

Circuit & alignment would also be useful as I believe that anything with a core in it has been tampered with.

Thanks
Marc


 
 Return to top of page · Post #: 2 · Written at 5:30:40 AM on 24 January 2011.
Gfr53's Gravatar
 Gfr53
 Location: Harston, VIC
 Member since 28 February 2009
 Member #: 442
 Postcount: 145


G'day Marc,

Could you send me an email to gfr55.bigpond.com and I'll reply with all the info you require.

Cheers, Graham...
 
 Return to top of page · Post #: 3 · Written at 3:25:57 PM on 24 January 2011.
Marcc's avatar
 Marcc
 Location: Wangaratta, VIC
 Member since 21 February 2009
 Member #: 438
 Postcount: 5254

Graham ... thanks will do.

Marc
 
 Return to top of page · Post #: 4 · Written at 10:53:58 PM on 29 January 2011.
Marcc's avatar
 Marcc
 Location: Wangaratta, VIC
 Member since 21 February 2009
 Member #: 438
 Postcount: 5254

Graham thanks for info.

Missing tracks confirmed & repaired

Fiddling noted further in, as there a 2 screws missing.

100Meg Osc was way off.

No oscillator input noted at 1st mixer (Q4) or Q5 & Q6. HFO plug is (naturally) showing no evidence of signal.\ (CRO & Freq counter)

T4 is a "Ring in" It is supposed to be a coupling transformer. Has no brand every other one has.
Only has one winding (pulled it to bits) needs two?

Looks like I need the right one.

Marc
 
« Back · 1 · Next »
 You need to be a member to post comments on this forum.

Sign In

Username:
Password:
 Keep me logged in.
Do not tick box on a computer with public access.

Vintage Radio and Television is proudly brought to you by an era where things were built with pride and made to last.

DISCLAIMER: Valve radios and televisions contain voltages that can deliver lethal shocks. You should not attempt to work on a valve radio or other electrical appliances unless you know exactly what you are doing and have gained some experience with electronics and working around high voltages. The owner, administrators and staff of Vintage Radio & Television will accept no liability for any damage, injury or loss of life that comes as a result of your use or mis-use of information on this website. Please read our Safety Warning before using this website.

WARNING: Under no circumstances should you ever apply power to a vintage radio, television or other electrical appliance you have acquired without first having it checked and serviced by an experienced person. Also, at no time should any appliance be connected to an electricity supply if the power cord is damaged. If in doubt, do not apply power.

Shintara - Keepin' It Real · VileSilencer - Maintain The Rage