Tech Talk
Forum home - Go back to Tech talk
|
Oak Vibrator
|
|
|
« Back ·
1 ·
Next »
|
|
|
Return to top of page · Post #: 1 · Written at 3:41:13 PM on 16 October 2022.
|
|
|
Location: Bongaree, QLD
Member since 26 October 2018 Member #: 2308 Postcount: 89 |
|
Good Afternoon all, Does any body have the pinout diagram for an oak vibrator unit No v 5278. It has 2 large pins and four small pins |
|
|
Return to top of page · Post #: 2 · Written at 11:14:23 PM on 16 October 2022.
|
|
|
Location: Melbourne, VIC
Member since 20 September 2011 Member #: 1009 Postcount: 1208 |
|
I think you'll find what you are looking for here: |
|
|
Return to top of page · Post #: 3 · Written at 11:09:06 AM on 17 October 2022.
|
|
|
|
Location: Bongaree, QLD
Member since 26 October 2018 Member #: 2308 Postcount: 89 |
|
Hi Monochrome TV, Thanks for your help. Bowler |
|
|
« Back ·
1 ·
Next »
|
|
|
You need to be a member to post comments on this forum.
|
|
Sign In
Vintage Radio and Television is proudly brought to you by an era where things were built with pride and made to last.
DISCLAIMER: Valve radios and televisions contain voltages that can deliver lethal shocks. You should not attempt to work on a valve radio or other electrical appliances unless you know exactly what you are doing and have gained some experience with electronics and working around high voltages. The owner, administrators and staff of Vintage Radio & Television will accept no liability for any damage, injury or loss of life that comes as a result of your use or mis-use of information on this website. Please read our Safety Warning before using this website.
WARNING: Under no circumstances should you ever apply power to a vintage radio, television or other electrical appliance you have acquired without first having it checked and serviced by an experienced person. Also, at no time should any appliance be connected to an electricity supply if the power cord is damaged. If in doubt, do not apply power.
Shintara - Keepin' It Real · VileSilencer - Maintain The Rage