Welcome to Australia's only Vintage Radio and Television discussion forums. You are not logged in. Please log in below, apply for an account or retrieve your password.
Australian Vintage Radio Forums
  Home  ·  About Us  ·  Discussion Forums  ·  Glossary  ·  Outside Links  ·  Policies  ·  Services Directory  ·  Safety Warnings  ·  Tutorials

Tech Talk

Forum home - Go back to Tech talk

 dial cord slipping
« Back · 1 · Next »
 Return to top of page · Post #: 1 · Written at 12:06:25 PM on 26 September 2010.
Met's Gravatar
 Met
 Location: NSW
 Member since 3 October 2009
 Member #: 554
 Postcount: 80

Hi all,

i have replaced the dial cord to an old radio.

however I have managed to lubricate part of the cord whilst putting it on and as a consequense, its now slipping.

outside of spending more frustrating time in replacing it,
does anyone know of something I can apply to the spindle so that I can get some traction going?

thanks
marc
 
 Return to top of page · Post #: 2 · Written at 7:28:49 PM on 26 September 2010.
Marcc's avatar
 Marcc
 Location: Wangaratta, VIC
 Member since 21 February 2009
 Member #: 438
 Postcount: 5254

Having replaced several dozen cords, it's not that difficult, especially if you have one to copy from.

Circuit board cleaner or metho is worth a try, however do note that the nylon or whatever they used in the 50's, and has usually gone hard does not like these, turpentine also falls into this category & there is no guarantee that these solvents will not attack whatever you have (other than cellulose).

Marc
 
 Return to top of page · Post #: 3 · Written at 11:18:40 AM on 27 September 2010.
STC830's Gravatar
 STC830
 Location: NSW
 Member since 10 June 2010
 Member #: 681
 Postcount: 1256

Maybe some finely powdered chalk which would absorb the lubricant so you can vacuum it out, and provide some grip. Or maybe kitty-litter dust.
 
 Return to top of page · Post #: 4 · Written at 9:32:56 PM on 27 September 2010.
Marcc's avatar
 Marcc
 Location: Wangaratta, VIC
 Member since 21 February 2009
 Member #: 438
 Postcount: 5254

Talcum powder & lime will absorb oil to some extent, but once its into the cordage structure, you have a problem.

Marc
 
 Return to top of page · Post #: 5 · Written at 8:24:12 PM on 28 September 2010.
Brad's avatar
 Brad
 Administrator
 Location: Naremburn, NSW
 Member since 15 November 2005
 Member #: 1
 Postcount: 7301

May I suggest straight ammonia. Ammonia will clean anything and it is cheap. Keep your snoz away from the top of the bottle and the piece of cloth you are using though. Tongue


‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾
A valve a day keeps the transistor away...

 
 Return to top of page · Post #: 6 · Written at 11:25:40 PM on 29 September 2010.
Met's Gravatar
 Met
 Location: NSW
 Member since 3 October 2009
 Member #: 554
 Postcount: 80

Thanks for all the suggestions.... I will try, before I decide to re string....
much obliged to all.
marc
 
« Back · 1 · Next »
 You need to be a member to post comments on this forum.

Sign In

Username:
Password:
 Keep me logged in.
Do not tick box on a computer with public access.

Vintage Radio and Television is proudly brought to you by an era where things were built with pride and made to last.

DISCLAIMER: Valve radios and televisions contain voltages that can deliver lethal shocks. You should not attempt to work on a valve radio or other electrical appliances unless you know exactly what you are doing and have gained some experience with electronics and working around high voltages. The owner, administrators and staff of Vintage Radio & Television will accept no liability for any damage, injury or loss of life that comes as a result of your use or mis-use of information on this website. Please read our Safety Warning before using this website.

WARNING: Under no circumstances should you ever apply power to a vintage radio, television or other electrical appliance you have acquired without first having it checked and serviced by an experienced person. Also, at no time should any appliance be connected to an electricity supply if the power cord is damaged. If in doubt, do not apply power.

Shintara - Keepin' It Real · VileSilencer - Maintain The Rage