Tech Talk
Forum home - Go back to Tech talk
|
Mullard MAS1111 mystery resister
|
|
|
Return to top of page · Post #: 16 · Written at 11:39:47 AM on 23 July 2024.
|
|
|
Location: Sydney, NSW
Member since 11 July 2024 Member #: 2656 Postcount: 20 |
|
Thanks all, after moving the primary to the 250/260v tap, the b+ is now 252v, the anode voltage on 6m5 is 224v and the filament voltage is now 6.0 v. Seems a fair compromise in the quest to lose that resister. |
|
|
Return to top of page · Post #: 17 · Written at 11:42:20 AM on 23 July 2024.
|
|
|
|
Location: Sydney, NSW
Member since 11 July 2024 Member #: 2656 Postcount: 20 |
|
Duplicate, I didn't release the thread had paginated!. |
|
|
You need to be a member to post comments on this forum.
|
|
Sign In
Vintage Radio and Television is proudly brought to you by an era where things were built with pride and made to last.
DISCLAIMER: Valve radios and televisions contain voltages that can deliver lethal shocks. You should not attempt to work on a valve radio or other electrical appliances unless you know exactly what you are doing and have gained some experience with electronics and working around high voltages. The owner, administrators and staff of Vintage Radio & Television will accept no liability for any damage, injury or loss of life that comes as a result of your use or mis-use of information on this website. Please read our Safety Warning before using this website.
WARNING: Under no circumstances should you ever apply power to a vintage radio, television or other electrical appliance you have acquired without first having it checked and serviced by an experienced person. Also, at no time should any appliance be connected to an electricity supply if the power cord is damaged. If in doubt, do not apply power.
Shintara - Keepin' It Real · VileSilencer - Maintain The Rage