Welcome to Australia's only Vintage Radio and Television discussion forums. You are not logged in. Please log in below, apply for an account or retrieve your password.
Australian Vintage Radio Forums
  Home  ·  About Us  ·  Discussion Forums  ·  Glossary  ·  Outside Links  ·  Policies  ·  Services Directory  ·  Safety Warnings  ·  Tutorials

Special Projects

Forum home - Go back to Special Projects

 Installing a bluetooth mp3/usb/sd card unit
« Back · 1 · Next »
 Return to top of page · Post #: 1 · Written at 9:57:36 PM on 3 February 2018.
Truebluepiper's Gravatar
 Truebluepiper
 Location: Coomera, QLD
 Member since 3 February 2018
 Member #: 2207
 Postcount: 3

I have just purchased for myself a Kriesler Multisonic Radiogram (model: 11 - 133B) and I would like to install a bluetooth device that has mp3, usb, and sd card slot with FM radio. (That way I can have the best of both worlds)
I have been told that I need to buy one that has a "line out" so that I can connect it to the amplifier.
I have provided a photo of one that I am looking at...but am unsure if it has a line out or not.
Any other suggestions would be appreciative.
Thanks.
 
 Return to top of page · Post #: 2 · Written at 7:41:23 PM on 4 February 2018.
Ian Robertson's Gravatar
 Ian Robertson
 Location: Belrose, NSW
 Member since 31 December 2015
 Member #: 1844
 Postcount: 2370

I have done just exactly this with a similar HMV radiogram for my partner's son. I put the module in a plastic box and installed a couple of RCA jacks on the HMV, wired across the pickup inputs. That way, when you want to use the vinyl, just unplug the RCAs.

It works really well and was a great Christmas present!
 
« Back · 1 · Next »
 You need to be a member to post comments on this forum.

Sign In

Username:
Password:
 Keep me logged in.
Do not tick box on a computer with public access.

Vintage Radio and Television is proudly brought to you by an era where things were built with pride and made to last.

DISCLAIMER: Valve radios and televisions contain voltages that can deliver lethal shocks. You should not attempt to work on a valve radio or other electrical appliances unless you know exactly what you are doing and have gained some experience with electronics and working around high voltages. The owner, administrators and staff of Vintage Radio & Television will accept no liability for any damage, injury or loss of life that comes as a result of your use or mis-use of information on this website. Please read our Safety Warning before using this website.

WARNING: Under no circumstances should you ever apply power to a vintage radio, television or other electrical appliance you have acquired without first having it checked and serviced by an experienced person. Also, at no time should any appliance be connected to an electricity supply if the power cord is damaged. If in doubt, do not apply power.

Shintara - Keepin' It Real · VileSilencer - Maintain The Rage