Welcome to Australia's only Vintage Radio and Television discussion forums. You are not logged in. Please log in below, apply for an account or retrieve your password.
Australian Vintage Radio Forums
  Home  ·  About Us  ·  Discussion Forums  ·  Glossary  ·  Outside Links  ·  Policies  ·  Services Directory  ·  Safety Warnings  ·  Tutorials

General Discussion

Forum home - Go back to General discussion

 Valve Radio Public Address Systems
« Back · 1 · 2 · 3 · 4 · Next »
 Return to top of page · Post #: 31 · Written at 9:48:54 PM on 13 April 2015.
Pa Man's Gravatar
 Location: Golden Grove, SA
 Member since 10 April 2015
 Member #: 1726
 Postcount: 149

Yep the smaller of the 3 transformers is a Trimax which is used to balance the microphone input and also drop it from high impedance to low. The power and output transformers would have been made by Bland but are unmarked.


 
 Return to top of page · Post #: 32 · Written at 10:36:52 PM on 13 April 2015.
GTC's avatar
 GTC
 Location: Sydney, NSW
 Member since 28 January 2011
 Member #: 823
 Postcount: 6688

 
 Return to top of page · Post #: 33 · Written at 9:18:05 AM on 14 April 2015.
MonochromeTV's avatar
 Location: Melbourne, VIC
 Member since 20 September 2011
 Member #: 1009
 Postcount: 1182

Whoops!

I pasted an incomplete URL.

Yes, that is the transformer I was trying to describe.


 
 Return to top of page · Post #: 34 · Written at 10:22:15 AM on 14 April 2015.
Marcc's avatar
 Location: Wangaratta, VIC
 Member since 21 February 2009
 Member #: 438
 Postcount: 5257

Line transformers can be as small as the speaker transformer & choke on a domestic set. The ones on the 100V lines on the units that tend to use valves like 6CM5 with 300VDC on the plates tend to use rather large heavy transformers that are sometimes bigger than their power transformer.

Marc


 
 Return to top of page · Post #: 35 · Written at 11:39:03 AM on 14 April 2015.
Pa Man's Gravatar
 Location: Golden Grove, SA
 Member since 10 April 2015
 Member #: 1726
 Postcount: 149

Also sometimes the bigger the transformer the better the frequency response.
Philips built an 20 watt monitor amp, the transformers were huge.
But the frequency response was flat 20Hz to 20kHz and relatively low
distortion.

Josh


 
 Return to top of page · Post #: 36 · Written at 7:19:38 PM on 14 April 2015.
Brad's avatar
 Administrator
 Location: Naremburn, NSW
 Member since 15 November 2005
 Member #: 1
 Postcount: 7307

I fixed the Ebay link.


‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾
A valve a day keeps the transistor away...

 
 Return to top of page · Post #: 37 · Written at 8:56:39 PM on 14 April 2015.
GTC's avatar
 GTC
 Location: Sydney, NSW
 Member since 28 January 2011
 Member #: 823
 Postcount: 6688

Now my link is not working. Ugh.


 
 Return to top of page · Post #: 38 · Written at 5:32:40 AM on 15 April 2015.
Brad's avatar
 Administrator
 Location: Naremburn, NSW
 Member since 15 November 2005
 Member #: 1
 Postcount: 7307

I've linked to the same auction - they probably don't like hotlinking to their image files. A lot of sites block it.


‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾
A valve a day keeps the transistor away...

 
 Return to top of page · Post #: 39 · Written at 7:43:23 AM on 15 April 2015.
Marcc's avatar
 Location: Wangaratta, VIC
 Member since 21 February 2009
 Member #: 438
 Postcount: 5257

I would not immediately panic The ordinary Telstra internet (& everything else) here out of Wangaratta Vic. Has been intermittent for several weeks & many neighbours have contacted me.

They have put up a few NBN towers up around here (not connected) so I will assume they are sweating on the NBN to solve their problems. I already have a letter admitting that the system here is suffering congestion and they intend to do nothing. A copy was sent to the local Federal MP

Marc


 
 Return to top of page · Post #: 40 · Written at 11:46:33 AM on 15 April 2015.
GTC's avatar
 GTC
 Location: Sydney, NSW
 Member since 28 January 2011
 Member #: 823
 Postcount: 6688

My link did work when I posted it, but then eBay seems to have blocked it. Brad may be on the money there.

Internet speed is another issue. Some are blaming the introduction of Netflix for recent congestion and there may be something in that, especially during the present school holiday period.


 
 Return to top of page · Post #: 41 · Written at 1:07:02 PM on 15 April 2015.
Brad's avatar
 Administrator
 Location: Naremburn, NSW
 Member since 15 November 2005
 Member #: 1
 Postcount: 7307

Some are blaming the introduction of Netflix for recent congestion...

iiNet customers have been affected by this. Okay, it's a legal service, though I don't understand why people need more TV channels. Netflix, along with Presto and Stan, will bring the Net to its knees if some careful planning for the future isn't done by the government and ISPs.


‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾
A valve a day keeps the transistor away...

 
 Return to top of page · Post #: 42 · Written at 3:53:42 PM on 15 April 2015.
GTC's avatar
 GTC
 Location: Sydney, NSW
 Member since 28 January 2011
 Member #: 823
 Postcount: 6688

iiNet customers have been affected by this.

Yep, we sure have!

These days I don't expect iiNet to do any planning. Witness their total shutdown during summer because it got hot in Perth. Also, it's currently subject to a takeover bid by TPG (God/ACCC forbid that should succeed.)

iiNet has steadily gone downhill since its founder sold it.


 
 Return to top of page · Post #: 43 · Written at 6:51:31 PM on 15 April 2015.
Brad's avatar
 Administrator
 Location: Naremburn, NSW
 Member since 15 November 2005
 Member #: 1
 Postcount: 7307

I've actually found TPG okay over the last five or six years. They supply the connection for this site and it's been one of the better parts of the system. I'd agree that they once had a reputation they deserved but in recent years things have been better. Their weak link is their support line - with staff not exactly fluent in English. I doubt that will change as pricing would need to increase a lot to improve in that area.

I'll be interested to see how TPG handles the takeover since iiNet is a conglomerate of six or seven regional ISPs. They may well leave branding as is for the time being.


‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾
A valve a day keeps the transistor away...

 
 Return to top of page · Post #: 44 · Written at 10:26:46 PM on 15 April 2015.
Daro's avatar
 Location: Tanawha, QLD
 Member since 22 December 2012
 Member #: 1263
 Postcount: 45

I had the same problems with Optus & my internet is via my mobile which I use as a Wi-Fi hot spot & I couldn't get on for around an hour because I kept getting booted off after a few mins.


 
 Return to top of page · Post #: 45 · Written at 10:42:25 PM on 15 April 2015.
GTC's avatar
 GTC
 Location: Sydney, NSW
 Member since 28 January 2011
 Member #: 823
 Postcount: 6688

It's no lay down misere that the ACCC will approve the takeover and I hope it doesn't for the sake of competition. I have to admit that iiNet support has been pretty good the times that I've needed to use it. I had an atrocious experience with TPG many years ago and couldn't get away from it fast enough.

Anyway, this is way off topic, so I'll stop with that.


 
« Back · 1 · 2 · 3 · 4 · Next »
 You need to be a member to post comments on this forum.

Sign In

Username:
Password:
 Keep me logged in.
Do not tick box on a computer with public access.