Suggestion for Brad
|
|
|
|
Location: East Maitland, NSW
Member since 13 May 2013
Member #: 1342
Postcount: 243
|
Why don't you do a TV of the week as well since we have a TV section here? I have had this idea since day one I joined this forum
‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾
"I'd rather have a CRT than nothing" - me
"people just throw working CRTs out, it is NOT FUNNY!" -me
|
|
|
|
Administrator
Location: Naremburn, NSW
Member since 15 November 2005
Member #: 1
Postcount: 7301
|
Not a bad idea though it'd most likely become part of the same feature. I do not have any good photos of valve televisions though as I don't collect them.
If I could get hold of 13 clear, perfectly contrasted, high-res photos of Australian B&W televisions with accompanying information on make, model, place of manufacture, number of valves, screen size, etc.; I'd probably go ahead.
‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾
A valve a day keeps the transistor away...
|
|
|
|
Location: East Maitland, NSW
Member since 13 May 2013
Member #: 1342
Postcount: 243
|
I have a 1962 HMV P1 and a 1966-67 HMV Trent television, the HMV Trent has I think about 13 valves, is a 23" rectangular set and it is currently half working, a mate is restoring it for me and after it gets restored it is going to have a DVD player hooked to it it is a B&W set too
‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾
"I'd rather have a CRT than nothing" - me
"people just throw working CRTs out, it is NOT FUNNY!" -me
|
|
|
|
Location: East Maitland, NSW
Member since 13 May 2013
Member #: 1342
Postcount: 243
|
But I do not know where my Trent was made, it would probably be Melbourne because it said something about Victoria on the back
‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾
"I'd rather have a CRT than nothing" - me
"people just throw working CRTs out, it is NOT FUNNY!" -me
|
|
|
|
Administrator
Location: Naremburn, NSW
Member since 15 November 2005
Member #: 1
Postcount: 7301
|
HMV's Sydney factory was on Parramatta Road at Homebush, right next to the Arnott's railway bridge. The building is now occupied by Kennards Self Storage.
I am not sure if HMV had factories elsewhere.
‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾
A valve a day keeps the transistor away...
|
|
|
|
Location: East Maitland, NSW
Member since 13 May 2013
Member #: 1342
Postcount: 243
|
My two TVs were made there, so I think you should start it up with one of my TVs
‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾
"I'd rather have a CRT than nothing" - me
"people just throw working CRTs out, it is NOT FUNNY!" -me
|
|
|
|
Administrator
Location: Naremburn, NSW
Member since 15 November 2005
Member #: 1
Postcount: 7301
|
Sounds good - best to lead by example.
Don't forget the photos have to be clear and high-res. Use a real camera rather than a mobile phone. I will do the resizing and I need lots of info. Use the ROTW data as a guide to what is needed.
‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾
A valve a day keeps the transistor away...
|
|
|
|
Location: East Maitland, NSW
Member since 13 May 2013
Member #: 1342
Postcount: 243
|
Sorry Brad, my iPad is all I've got for a camera, and I try to get my photos as good looking as possible, my P1 was manufactured at the Sydney HMV factory, it uses 13 valves, which I have pulled out to use in my 1966-67 HMV Trent, though will look at the other ones, I'll give you the schematics for it now
‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾
"I'd rather have a CRT than nothing" - me
"people just throw working CRTs out, it is NOT FUNNY!" -me
|
|
|
|
Location: East Maitland, NSW
Member since 13 May 2013
Member #: 1342
Postcount: 243
|
And it is a 17" screen I think too
‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾
"I'd rather have a CRT than nothing" - me
"people just throw working CRTs out, it is NOT FUNNY!" -me
|
|
|
|
Administrator
Location: Naremburn, NSW
Member since 15 November 2005
Member #: 1
Postcount: 7301
|
Ahhh well, see how you go with it. We can but try.
‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾
A valve a day keeps the transistor away...
|
|
|
|
Location: East Maitland, NSW
Member since 13 May 2013
Member #: 1342
Postcount: 243
|
I got the news from my TV tech he hasn't finished it up yet so hopefully it will work when he does finish it!
‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾
"I'd rather have a CRT than nothing" - me
"people just throw working CRTs out, it is NOT FUNNY!" -me
|
|
|
|
Location: East Maitland, NSW
Member since 13 May 2013
Member #: 1342
Postcount: 243
|
Well I hope my TV gets finished soon I've been having withdrawals of looking at it on the legs!
‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾
"I'd rather have a CRT than nothing" - me
"people just throw working CRTs out, it is NOT FUNNY!" -me
|
|
|
|
Location: Wauchope, NSW
Member since 1 January 2013
Member #: 1269
Postcount: 576
|
If Nathan and I meet up again in the future, I'll be sure to take some photos with my digital camera for this purpose. However, that probably won't be for a while, thanks to the workload of Year 12.
Brad, do they strictly have to be valve receivers, or would solid state receivers be welcomes too? I have two valve sets (AWA P1Q and Astor SJ), though neither of them are exactly the best of their type (various detracting damage etc.).
I have heaps of vintage televisions in my collection, featured on my website below. They are mostly 1970s and 1980s B&W and colour solid-state sets, but there might be one or two worth a photo?
http://thyhumbletoll.webs.com/electronicscollection.htm
Cheers,
Chris
|
|
|
|
Administrator
Location: Naremburn, NSW
Member since 15 November 2005
Member #: 1
Postcount: 7301
|
I'd prefer any features receivers to have valves however an OLD (more than 30 years) solid state receiver would comply with the vintage theme.
For 2014 I am looking at ditching all the current radios and photographing some of the ones I still have in my collection.
If members want to contribute then I am happy to make space available. The photos have to be top notch and high-res though, for presentation purposes. I won't publish anything that is blurry, too close to the camera or under exposed. Members need to supply details with their photos as I won't have the time to conduct any of the research.
‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾
A valve a day keeps the transistor away...
|
|
|
|
Location: Wauchope, NSW
Member since 1 January 2013
Member #: 1269
Postcount: 576
|
Brad,
Are there any sets in my collection you would want photos of? I have a high-red Cannon digital camera, so photographs are no issue. I could have a look around for basic info, and can supply basic info on the sets.
Two sets I think would be good, would be my 1973 PHILIPS 02TA122 and early 1970s PYE 12G13. They are both B&W solid-state receivers.
Chris
|
|
|
You need to be a member to post comments on this forum.
|