Welcome to Australia's only Vintage Radio and Television discussion forums. You are not logged in. Please log in below, apply for an account or retrieve your password.
Australian Vintage Radio Forums
  Home  ·  About Us  ·  Discussion Forums  ·  Glossary  ·  Outside Links  ·  Policies  ·  Services Directory  ·  Safety Warnings  ·  Tutorials

General Discussion

Forum home - Go back to General discussion

 Kriesler 11-77 or 11-78 Model
« Back · 1 · Next »
 Return to top of page · Post #: 1 · Written at 7:16:33 PM on 2 July 2010.
Codan's Gravatar
 Codan
 Location: Barr, NSW
 Member since 2 July 2010
 Member #: 690
 Postcount: 8

Hello everyone,

I have a Kriesler Stereophonic, either a Model 11-77 or 11-78 by the Tag on the Rear of it.

I was wondering if someone could help me out with a Schematic for this particular model.

Also does anyone know the amplifier power output for this?

Thank You
 
 Return to top of page · Post #: 2 · Written at 7:30:06 AM on 3 July 2010.
Gfr53's Gravatar
 Gfr53
 Location: Harston, VIC
 Member since 28 February 2009
 Member #: 442
 Postcount: 145


Hi, If you let me know your email addy, I'll send a copy to you.

Each audio channel has a single ended 6M5 to drive its speaker so the output is most likely around 5 to 7 watts per channel max.

Cheers, Graham...
 
 Return to top of page · Post #: 3 · Written at 8:01:24 AM on 3 July 2010.
Codan's Gravatar
 Codan
 Location: Barr, NSW
 Member since 2 July 2010
 Member #: 690
 Postcount: 8

Thanks for the info Graham,

My email address is:

codan2010.gmail.com

Thanks again

Codan
 
 Return to top of page · Post #: 4 · Written at 8:45:45 AM on 4 July 2010.
Codan's Gravatar
 Codan
 Location: Barr, NSW
 Member since 2 July 2010
 Member #: 690
 Postcount: 8

Graham,

Thanks very much for the info you sent, it will be very useful.
I have a few more questions but will study the Schematic & the info first.

Thanks again

Codan
 
 Return to top of page · Post #: 5 · Written at 5:40:10 PM on 24 March 2012.
Nucky's Gravatar
 Nucky
 Location: Managlore, TAS
 Member since 4 November 2011
 Member #: 1030
 Postcount: 29

Hi..

Am also in need of the schematic for this model so, if anyone can help, please email to me at:
nick.boslypask.gmail.com

Thanks (in advance!)


‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾
Nucky

 
 Return to top of page · Post #: 6 · Written at 6:32:38 AM on 25 March 2012.
Gfr53's Gravatar
 Gfr53
 Location: Harston, VIC
 Member since 28 February 2009
 Member #: 442
 Postcount: 145

Hi Nucky,

Check your inbox.

Cheers, Graham...
 
« Back · 1 · Next »
 You need to be a member to post comments on this forum.

Sign In

Username:
Password:
 Keep me logged in.
Do not tick box on a computer with public access.

Vintage Radio and Television is proudly brought to you by an era where things were built with pride and made to last.

DISCLAIMER: Valve radios and televisions contain voltages that can deliver lethal shocks. You should not attempt to work on a valve radio or other electrical appliances unless you know exactly what you are doing and have gained some experience with electronics and working around high voltages. The owner, administrators and staff of Vintage Radio & Television will accept no liability for any damage, injury or loss of life that comes as a result of your use or mis-use of information on this website. Please read our Safety Warning before using this website.

WARNING: Under no circumstances should you ever apply power to a vintage radio, television or other electrical appliance you have acquired without first having it checked and serviced by an experienced person. Also, at no time should any appliance be connected to an electricity supply if the power cord is damaged. If in doubt, do not apply power.

Shintara - Keepin' It Real · VileSilencer - Maintain The Rage