Welcome to Australia's only Vintage Radio and Television discussion forums. You are not logged in. Please log in below, apply for an account or retrieve your password.
Australian Vintage Radio Forums
  Home  ·  About Us  ·  Discussion Forums  ·  Glossary  ·  Outside Links  ·  Policies  ·  Services Directory  ·  Safety Warnings  ·  Tutorials

General Discussion

Forum home - Go back to General discussion

 Heatpump Hot water Systems are they good.
« Back · 1 · 2 · Next »
 Return to top of page · Post #: 16 · Written at 8:56:58 AM on 26 September 2023.
Marcc's avatar
 Location: Wangaratta, VIC
 Member since 21 February 2009
 Member #: 438
 Postcount: 5267

One should also not that with some companies, in particular here. Electronic spares are provided at several hundred percent over the cost of what it would have been built for in SE Asia.


 
 Return to top of page · Post #: 17 · Written at 2:51:33 PM on 26 September 2023.
Tallar Carl's avatar
 Location: Latham, ACT
 Member since 21 February 2015
 Member #: 1705
 Postcount: 2158

Its a good thing I grew up without air conditioning lol. How did we survive?


 
 Return to top of page · Post #: 18 · Written at 6:10:47 PM on 26 September 2023.
STC830's Gravatar
 Location: NSW
 Member since 10 June 2010
 Member #: 681
 Postcount: 1261

"How did we survive?"

We were a lot younger.


 
 Return to top of page · Post #: 19 · Written at 6:21:56 AM on 27 September 2023.
Brad's avatar
 Administrator
 Location: Naremburn, NSW
 Member since 15 November 2005
 Member #: 1
 Postcount: 7311

Age hasn't got much bearing on gruffness these days. Most new school buildings have air conditioning systems that would bankrupt a household budget in terms of running costs. Kids have it all laid on. When I was at school, if a classroom had a pair of creaky, out of balance ceiling fans then that was a luxury. We were allowed to take our ties off if the temperature hit 40 degrees.

That was about it. We got by because we simply didn't know any different.


‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾
A valve a day keeps the transistor away...

 
 Return to top of page · Post #: 20 · Written at 9:10:10 AM on 27 September 2023.
Tallar Carl's avatar
 Location: Latham, ACT
 Member since 21 February 2015
 Member #: 1705
 Postcount: 2158

STC830 I still don't have air-conditioning LOL and I live in Canberra. We only have electric oil heaters in the bedroom.


 
 Return to top of page · Post #: 21 · Written at 9:39:35 PM on 27 September 2023.
GTC's avatar
 GTC
 Location: Sydney, NSW
 Member since 28 January 2011
 Member #: 823
 Postcount: 6692

 
 Return to top of page · Post #: 22 · Written at 8:47:18 AM on 3 October 2023.
Tallar Carl's avatar
 Location: Latham, ACT
 Member since 21 February 2015
 Member #: 1705
 Postcount: 2158

Well I'm confident my electricity bill will be well below zero this year. The solar panels have been fully paid off for over a year now and I haven't paid a cent in electricity.


 
 Return to top of page · Post #: 23 · Written at 9:15:12 PM on 3 October 2023.
Marcc's avatar
 Location: Wangaratta, VIC
 Member since 21 February 2009
 Member #: 438
 Postcount: 5267

Interesting:

I have a 29 year old ride on Mower & I was amazed that I could do a work around on a failed sprocket on the transmission. It had chomped up Nylon rollers on the chain tensioner and the great thing there is that I just turned new ones to replace them. they lasted about 500 hrs in a hostile environment.

With things with boards: I got a call out on a very old CIG non-inverter type Gas Mig welder yesterday, with a wire feed failure. I noted that the coating on its control board was a bit tired. However, I was lucky, all it needed was to reflow the solder on the headers as the, bond had cracked on a couple, cleaned it recoated it and its back in service.

That's what I love about the old Grey Fergy: Ignition switch wore out: Off the shelf part. Blew the head gasket: Annoying Everything to fix it & resultant general overhaul :Off the shelf parts. Age of unit 72 years.


 
« Back · 1 · 2 · Next »
 You need to be a member to post comments on this forum.

Sign In

Username:
Password:
 Keep me logged in.
Do not tick box on a computer with public access.