General Discussion
Forum home - Go back to General discussion
|
Radio identification help.
|
|
|
Return to top of page · Post #: 31 · Written at 4:15:42 PM on 21 June 2020.
|
|
|
Location: Belrose, NSW
Member since 31 December 2015 Member #: 1844 Postcount: 2372 |
|
Robert, no problem sourcing Decal tube sockets (search term). |
|
|
Return to top of page · Post #: 32 · Written at 5:34:15 PM on 21 June 2020.
|
|
|
Location: Kanahooka, NSW
Member since 18 November 2016 Member #: 2012 Postcount: 712 |
|
I am now ready to start on this TRF receiver. |
|
|
Return to top of page · Post #: 33 · Written at 5:46:53 PM on 21 June 2020.
|
|
|
Location: Hill Top, NSW
Member since 18 September 2015 Member #: 1801 Postcount: 2015 |
|
Ian, that's great. It would be interesting to see if it's possible to make such a radio. |
|
|
You need to be a member to post comments on this forum.
|
|
Sign In
Vintage Radio and Television is proudly brought to you by an era where things were built with pride and made to last.
DISCLAIMER: Valve radios and televisions contain voltages that can deliver lethal shocks. You should not attempt to work on a valve radio or other electrical appliances unless you know exactly what you are doing and have gained some experience with electronics and working around high voltages. The owner, administrators and staff of Vintage Radio & Television will accept no liability for any damage, injury or loss of life that comes as a result of your use or mis-use of information on this website. Please read our Safety Warning before using this website.
WARNING: Under no circumstances should you ever apply power to a vintage radio, television or other electrical appliance you have acquired without first having it checked and serviced by an experienced person. Also, at no time should any appliance be connected to an electricity supply if the power cord is damaged. If in doubt, do not apply power.
Shintara - Keepin' It Real · VileSilencer - Maintain The Rage