Welcome to Australia's only Vintage Radio and Television discussion forums. You are not logged in. Please log in below, apply for an account or retrieve your password.
Australian Vintage Radio Forums
  Home  ·  About Us  ·  Discussion Forums  ·  Glossary  ·  Outside Links  ·  Policies  ·  Services Directory  ·  Safety Warnings  ·  Tutorials

General Discussion

Forum home - Go back to General discussion

 B15 Radiola bits, can anybody help?
« Back · 1 · Next »
 Return to top of page · Post #: 1 · Written at 11:01:10 PM on 17 November 2016.
JamieLee's Gravatar
 JamieLee
 Location: Clare, SA
 Member since 27 March 2016
 Member #: 1894
 Postcount: 510

Hello, I have acquired my 4th one now which is missing one bolt which holds the front of the case to the rear. It had a bad crack in the casing also which I have repaired, however if anybody has a spare one of these and is willing to part with it, please contact me. There are 4 screws underneath holding the chassis to the case and two bolts, it is one of these bolts I need!

Also I have one missing two knobs, does anybody have, or know where I can get a couple of B15 Radiola knobs?
Cheers. Jamie.
 
 Return to top of page · Post #: 2 · Written at 10:59:08 AM on 18 November 2016.
Ian Robertson's Gravatar
 Ian Robertson
 Location: Belrose, NSW
 Member since 31 December 2015
 Member #: 1844
 Postcount: 2476

I'm planning a knob moulding session sometime in the next couple of weeks, I need to clone a couple of HMV radiogram knobs. Send me one and I could make you a couple of replicas in clear epoxy. You'd have to drill and paint them. The epoxy is about the same colour as the anodised aluminium surround.

Can't help with the bolt. There is a store in Brookvale (NSW) called Bomonds (now part of Edcon steel) that is very good for unusual bolts.

Ian
 
 Return to top of page · Post #: 3 · Written at 2:05:04 PM on 18 November 2016.
Marcc's avatar
 Marcc
 Location: Wangaratta, VIC
 Member since 21 February 2009
 Member #: 438
 Postcount: 5389

If its a common bolt, there are plenty of Industrial suppliers that have a range.

Marc
 
 Return to top of page · Post #: 4 · Written at 10:57:13 AM on 20 November 2016.
JamieLee's Gravatar
 JamieLee
 Location: Clare, SA
 Member since 27 March 2016
 Member #: 1894
 Postcount: 510

Thank you Ian, that would be awesome, please email me your postal address, cheers.
 
« Back · 1 · Next »
 You need to be a member to post comments on this forum.

Sign In

Username:
Password:
 Keep me logged in.
Do not tick box on a computer with public access.

Vintage Radio and Television is proudly brought to you by an era where things were built with pride and made to last.

DISCLAIMER: Valve radios and televisions contain voltages that can deliver lethal shocks. You should not attempt to work on a valve radio or other electrical appliances unless you know exactly what you are doing and have gained some experience with electronics and working around high voltages. The owner, administrators and staff of Vintage Radio & Television will accept no liability for any damage, injury or loss of life that comes as a result of your use or mis-use of information on this website. Please read our Safety Warning before using this website.

WARNING: Under no circumstances should you ever apply power to a vintage radio, television or other electrical appliance you have acquired without first having it checked and serviced by an experienced person. Also, at no time should any appliance be connected to an electricity supply if the power cord is damaged. If in doubt, do not apply power.

Shintara - Keepin' It Real · VileSilencer - Maintain The Rage