Please Help Identify My Valve Radio
|
|
|
|
Location: Sydney, NSW
Member since 28 January 2011
Member #: 823
Postcount: 6761
|
So it looks like the line up is 80, 47, 57, 58, 57
Marc's earlier comment about STC chassis colour may be a clue.
|
|
|
|
Location: Adelaide, SA
Member since 1 January 2015
Member #: 1674
Postcount: 9
|
You must've missed the 12th post. It is a 5 pin, just the picture perfectly obscures the fifth pin (apologies)
|
|
|
|
Location: Melbourne, VIC
Member since 20 September 2011
Member #: 1009
Postcount: 1208
|
Information on the Radiomuseum & NZVRS sites suggests the Radion brand was made by the Wellington firm of Collier & Beale.
|
|
|
|
Location: Melbourne, VIC
Member since 20 September 2011
Member #: 1009
Postcount: 1208
|
|
|
|
|
Administrator
Location: Naremburn, NSW
Member since 15 November 2005
Member #: 1
Postcount: 7395
|
"Smoke 555, they're good for you"
That's hilarious.
‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾
A valve a day keeps the transistor away...
|
|
|
|
Location: Sydney, NSW
Member since 28 January 2011
Member #: 823
Postcount: 6761
|
"Smoke 555, they're good for you"
In the early 1950s my mother was told by a doctor to take up smoking for her asthma! She gave it a go but the smoke nearly killed her.
|
|
|
|
Location: Sydney, NSW
Member since 28 January 2011
Member #: 823
Postcount: 6761
|
FOUND IT!!
Now, to find if the NZVRS has a schematic.
|
|
|
|
Location: Adelaide, SA
Member since 1 January 2015
Member #: 1674
Postcount: 9
|
Wow that advert is great! Well done on finding that I would've never found it. A schematic would be very helpful when it comes to trouble shooting this. I'm probably going to wait a while before I delve into finding the problem that is causing it to make no sound as I have a AWA 449MA on the bench at the moment which I'm pretty much rebuilding (had original AWA caps and rubber wires, all wrecked). Thinking ahead is a value of 50% tested in 1992 really good enough or am I going to have to find some better valves when I come to fixing the Radion? If so how do I acquire them? My relatively small valve collection is pretty well 90% miniature valves therefore I don't have any of the ones needed for this.
|
|
|
|
Location: Melbourne, VIC
Member since 20 September 2011
Member #: 1009
Postcount: 1208
|
I've since found a number of ads for Radion in the NZ papers including the one in Brads ebay link. Almost all the ads suggest they were distributed by Todd Motors of most major centres in NZ.
My theory now is that Radion was the house brand for Todd Motors and was manufactured for them by Collier & Beale.
Todd Motors had a auto assembly plant in Petone near Wellington. They assembled Chrysler, Rootes Group (Hillman, Humber, etc) and later on Mitsubshi vehicles.
|
|
|
|
Administrator
Location: Naremburn, NSW
Member since 15 November 2005
Member #: 1
Postcount: 7395
|
It reminds me of all the old smoking ads we had back in the 1970s and before. They portrayed smokers as rugged blokes who could cop anything this hard old country threw at them, successful businessmen or even women being elevated to the social class all because they smoked.
Winfield.
Marlboro.
Dukes.
Craven.
Of course, that all lead to this...
Yul Brynner - 'Whatever you do, just don't smoke'.
I have to say, with the cost of cigarettes these days, I am surprised that smoking is still being taken up. They sure as hell ain't 4 bob a pack now.
Back to the topic at hand, the NZVRS site doesn't have a search feature. There's a link to Collier and Beale but nothing relevant to Audion that I can see.
‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾
A valve a day keeps the transistor away...
|
|
|
|
Location: Melbourne, VIC
Member since 20 September 2011
Member #: 1009
Postcount: 1208
|
|
|
|
|
Location: Wangaratta, VIC
Member since 21 February 2009
Member #: 438
Postcount: 5389
|
At the end of the day I could not get a circuit for a 1932 EMMCO nor the STC 59 chassis and HRSA did not have the 59 Chassis circuit either. I now have one, but with unavoidable mods & I sent a copy with the radio.
I ended up with both, using the AutoCad to make a nice tidy one. The EMMCO went into Silicon Chip as a mystery, that resulted in a couple of letters to SC identifying it.
I doubt there will be huge difficulties reverse engineering it & sorting it out, without the circuit. As I said an Autodyne is an Autodyne and those are a common line up.
Stress levels not high here re fixing it.
Marc
|
|
|
|
Location: Melbourne, VIC
Member since 20 September 2011
Member #: 1009
Postcount: 1208
|
|
|
|
|
Location: Sydney, NSW
Member since 28 January 2011
Member #: 823
Postcount: 6761
|
|
|
|
|
Location: Wangaratta, VIC
Member since 21 February 2009
Member #: 438
Postcount: 5389
|
I would wonder if the Parliament version has more valves & creates more hot air? Or were the valves prone to going gassy?
Marc
|
|
|
You need to be a member to post comments on this forum.
|