Welcome to Australia's only Vintage Radio and Television discussion forums. You are not logged in. Please log in below, apply for an account or retrieve your password.
Australian Vintage Radio Forums
  Home  ·  About Us  ·  Discussion Forums  ·  Glossary  ·  Outside Links  ·  Policies  ·  Services Directory  ·  Safety Warnings  ·  Tutorials

General Discussion

Forum home - Go back to General discussion

 Kriesler radio model identification.
« Back · 1 · 2 · Next »
 Return to top of page · Post #: 16 · Written at 7:04:02 AM on 13 March 2018.
Fred Lever's Gravatar
 Fred Lever
 Location: Toongabbie, NSW
 Member since 19 November 2015
 Member #: 1828
 Postcount: 1394

My set had no arts label, but had a valve layout card that had the 3K15 model on it.
That's the set with the dial with the sloped pointer that Stuart told me me how it works.
Typing fast here as the site keeps going 500.
Fred.
 
 Return to top of page · Post #: 17 · Written at 10:08:19 AM on 13 March 2018.
Marcc's avatar
 Marcc
 Location: Wangaratta, VIC
 Member since 21 February 2009
 Member #: 438
 Postcount: 5663

To save re-writing copy between hissy fits & then paste, after its got over it & moved on.
 
 Return to top of page · Post #: 18 · Written at 1:33:23 PM on 13 March 2018.
Fred Lever's Gravatar
 Fred Lever
 Location: Toongabbie, NSW
 Member since 19 November 2015
 Member #: 1828
 Postcount: 1394

Well look at that...................

typing in word, then select,copy and then pasting in this box actually works! I’ll do that from now on.

Thanks Marc.
Fred
 
 Return to top of page · Post #: 19 · Written at 1:45:00 PM on 13 March 2018.
Marcc's avatar
 Marcc
 Location: Wangaratta, VIC
 Member since 21 February 2009
 Member #: 438
 Postcount: 5663

You can copy what's in the forum window as well as writing in Word & copy pasting. Always a way around some of these little aggravations.

Marc
 
 Return to top of page · Post #: 20 · Written at 6:48:06 PM on 13 March 2018.
Fred Lever's Gravatar
 Fred Lever
 Location: Toongabbie, NSW
 Member since 19 November 2015
 Member #: 1828
 Postcount: 1394

You can copy what's in the forum window as well as writing in Word & copy pasting. Always a way around some of these little aggravations.

Marc

Yep, ctrl c, then ctrl v, that's works fine, I understand now!

Fred.
 
 Return to top of page · Post #: 21 · Written at 6:53:01 PM on 13 March 2018.
Fred Lever's Gravatar
 Fred Lever
 Location: Toongabbie, NSW
 Member since 19 November 2015
 Member #: 1828
 Postcount: 1394

Sorry Stuart, we got off topic there!
Back to the Kriesler every body!
Fred.
 
« Back · 1 · 2 · Next »
 You need to be a member to post comments on this forum.

Sign In

Username:
Password:
 Keep me logged in.
Do not tick box on a computer with public access.

Vintage Radio and Television is proudly brought to you by an era where things were built with pride and made to last.

DISCLAIMER: Valve radios and televisions contain voltages that can deliver lethal shocks. You should not attempt to work on a valve radio or other electrical appliances unless you know exactly what you are doing and have gained some experience with electronics and working around high voltages. The owner, administrators and staff of Vintage Radio & Television will accept no liability for any damage, injury or loss of life that comes as a result of your use or mis-use of information on this website. Please read our Safety Warning before using this website.

WARNING: Under no circumstances should you ever apply power to a vintage radio, television or other electrical appliance you have acquired without first having it checked and serviced by an experienced person. Also, at no time should any appliance be connected to an electricity supply if the power cord is damaged. If in doubt, do not apply power.

Shintara - Keepin' It Real · VileSilencer - Maintain The Rage