Welcome to Australia's only Vintage Radio and Television discussion forums. You are not logged in. Please log in below, apply for an account or retrieve your password.
Australian Vintage Radio Forums
  Home  ·  About Us  ·  Discussion Forums  ·  Glossary  ·  Outside Links  ·  Policies  ·  Services Directory  ·  Safety Warnings  ·  Tutorials

General Discussion

Forum home - Go back to General discussion

 Pacemaker Valve Radio
« Back · 1 · 2 · Next »
 Return to top of page · Post #: 16 · Written at 4:41:11 AM on 20 December 2016.
Ray M's Gravatar
 Ray M
 Location: Palmerston North, NZ
 Member since 15 December 2016
 Member #: 2022
 Postcount: 7

Thanks for the great advice and help everyone.

Have possibly stumbled across someone who has a bit of history with this particular unit, just waiting on him to come back to me.


Ray
 
 Return to top of page · Post #: 17 · Written at 9:44:13 AM on 20 December 2016.
GTC's avatar
 GTC
 Location: Sydney, NSW
 Member since 28 January 2011
 Member #: 823
 Postcount: 6761

If you get some good info on it, let us know for the record.
 
 Return to top of page · Post #: 18 · Written at 11:21:44 AM on 20 December 2016.
Ray M's Gravatar
 Ray M
 Location: Palmerston North, NZ
 Member since 15 December 2016
 Member #: 2022
 Postcount: 7

Will do GTC.

Hopefully will be able to translate and relate some of the new terms I learn. Smile


Cheers
 
 Return to top of page · Post #: 19 · Written at 4:28:59 AM on 6 January 2017.
Ray M's Gravatar
 Ray M
 Location: Palmerston North, NZ
 Member since 15 December 2016
 Member #: 2022
 Postcount: 7

Good morning all

Happy new year, hope there were some good holiday breaks had.

Just a reference to what was going on with the pacemaker and as per GTC's request to follow up on what was found wrong with the radio,

After having it checked out, It requires a replacement output valve, the IF and RF amp valves require replacement . Several resistors and capacitors need replacement. The RF and IF sections require realignment as well as the dial drive requires re-lubrication and the speaker out put needs to be reconfigured.

Other than that, everything else is in good working order and condition.

Thanks for all the help guys.
 
« Back · 1 · 2 · Next »
 You need to be a member to post comments on this forum.

Sign In

Username:
Password:
 Keep me logged in.
Do not tick box on a computer with public access.

Vintage Radio and Television is proudly brought to you by an era where things were built with pride and made to last.

DISCLAIMER: Valve radios and televisions contain voltages that can deliver lethal shocks. You should not attempt to work on a valve radio or other electrical appliances unless you know exactly what you are doing and have gained some experience with electronics and working around high voltages. The owner, administrators and staff of Vintage Radio & Television will accept no liability for any damage, injury or loss of life that comes as a result of your use or mis-use of information on this website. Please read our Safety Warning before using this website.

WARNING: Under no circumstances should you ever apply power to a vintage radio, television or other electrical appliance you have acquired without first having it checked and serviced by an experienced person. Also, at no time should any appliance be connected to an electricity supply if the power cord is damaged. If in doubt, do not apply power.

Shintara - Keepin' It Real · VileSilencer - Maintain The Rage