Welcome to Australia's only Vintage Radio and Television discussion forums. You are not logged in. Please log in below, apply for an account or retrieve your password.
Australian Vintage Radio Forums
  Home  ·  About Us  ·  Discussion Forums  ·  Glossary  ·  Outside Links  ·  Policies  ·  Services Directory  ·  Safety Warnings  ·  Tutorials

Vintage Gramophones and Phonographs

Forum home - Go back to Vintage Gramophones and Phonographs

 Philips 178
« Back · 1 · Next »
 Return to top of page · Post #: 1 · Written at 8:12:47 PM on 22 December 2018.
Neadles's Gravatar
 Location: Shepparton, VIC
 Member since 22 December 2018
 Member #: 2312
 Postcount: 1

Hi, I have 2 Radiograms ones a 178 D and the others a 178 C that I've bought to restore.
The 178 C is complete and working plus is in good condition. The 178 D is quite a bit different to the 178 C . It has a separate power supply which sits on the bottom of the cabinet but is missing .

Does anybody have any ideas on tracking one down?

I have 2 circuit diagrams. I need to look at the units properly to see if they are correct but there must have been a lot of variations with these . This one has 3 speakers and I think on the power supply there was extra circuitry for tone control.
If it was just power supply I'd just make one but as usual with me it isn't that easy.

It also has Short Wave 1,2 and 3 the 178C only has one .

They're both nice units but the 178 D has a lot more bells and whistles.

Cheers
Brian


 
 Return to top of page · Post #: 2 · Written at 8:55:45 PM on 22 December 2018.
GTC's avatar
 GTC
 Location: Sydney, NSW
 Member since 28 January 2011
 Member #: 823
 Postcount: 4770

Searching around I note reference to 5 models from 1955/56: 178 (Beethoven), 178A, 178B, 178C, 178D, all with the same lineup:

6AN7 6N8 EF86 12AT7 EM34 6M5 6M5 6BD7 6M5 5V4G

With 10 valves (counting the rectifier and tuning eye), they would have been expensive radiograms in their time and with 3 speakers and separate amps for bass and treble they should sound pretty good.

The service information for all models talks about removing a sub-chassis as well as a main chassis. The power supply appears to be connected via an octal plug and socket.

I don't see mention in the documentation of 3 SW bands on any model, just BC + 2 SW.

There is mention that the phonograph in the D model is different and there are differences among the IF transformers for B-C-D (described in the alignment procedures).


 
« Back · 1 · Next »
 You need to be a member to post comments on this forum.

Sign In

Username:
Password:
 Keep me logged in.
Do not tick box on a computer with public access.