Welcome to Australia's only Vintage Radio and Television discussion forums. You are not logged in. Please log in below, apply for an account or retrieve your password.
Australian Vintage Radio Forums
  Home  ·  About Us  ·  Discussion Forums  ·  Glossary  ·  Outside Links  ·  Policies  ·  Services Directory  ·  Safety Warnings  ·  Tutorials

Vintage Television

Forum home - Go back to Vintage Television

 Maxwell TV radiogram
« Back · 1 · 2 · Next »
 Return to top of page · Post #: 16 · Written at 5:28:54 AM on 15 June 2019.
Fred Lever's Gravatar
 Location: Toongabbie, NSW
 Member since 19 November 2015
 Member #: 1828
 Postcount: 515

That is a nice looking well laid out chassis. Thank goodness there do not appear to be any wax capacitors! I note the transformers are also "next gen" windings (valve era) where a moulded bobbin system is used not layers of wax paper and crap wire. The electros also look like good candidates for careful reforming. The swing down chassis makes me sweat a bit about dropping it and jerking the looms on the tube neck. I wonder if there is a system to limit the angle? Looks like a good prospect to bring back to life.
Nice cabinet as well and with a record player and radio what more could you want!

 Return to top of page · Post #: 17 · Written at 6:30:53 AM on 15 June 2019.
MonochromeTV's avatar
 Location: Melbourne, VIC
 Member since 20 September 2011
 Member #: 1009
 Postcount: 1038

1/07, maybe KGH (Titan) & not Precedent.

I’ll check this out later this afternoon when I am back at home.

 Return to top of page · Post #: 18 · Written at 1:55:03 PM on 15 June 2019.
MonochromeTV's avatar
 Location: Melbourne, VIC
 Member since 20 September 2011
 Member #: 1009
 Postcount: 1038

Yes, it is a KGH 1/07.

KGH 1-07 Circuit Diagram

 Return to top of page · Post #: 19 · Written at 8:23:16 PM on 17 June 2019.
Brad's avatar
 Location: Greenwich, NSW
 Member since 15 November 2005
 Member #: 1
 Postcount: 5386

Document uploaded to Post 18.

A valve a day keeps the transistor away...

 Return to top of page · Post #: 20 · Written at 12:13:39 PM on 25 June 2019.
Ian Robertson's Gravatar
 Location: Belrose, NSW
 Member since 31 December 2015
 Member #: 1844
 Postcount: 1269

KGH (KG Harris) 1.07 chassis. Looks like a later version, where they put back some of the parts they had stripped out in previous models...

Not the tidiest build quality but quite serviceable none the less.

No need to re-cap this chassis, it has Ducon polyesters. But if any of those white caps are UCC Hi-Qual 's, replace them, they are paper. White "Di-Pol" s are OK.

Hor OP transformer (Philips NT3102) and cage is missing.

These sets can work OK, I have circuit if u need.

If you find a tranny and are keen, you should fit the EHT / width stabilisation circuit as is normal Philips practice.

Check CRT first of course.

 Return to top of page · Post #: 21 · Written at 3:02:21 PM on 6 July 2019.
Daro's avatar
 Location: Tanawha, QLD
 Member since 22 December 2012
 Member #: 1263
 Postcount: 38

Looks like it also needs a NOS or salvaged flyback transformer as well.

 Return to top of page · Post #: 22 · Written at 9:04:42 PM on 8 July 2019.
Scotty's Gravatar
 Location: Melbourne, VIC
 Member since 26 December 2010
 Member #: 794
 Postcount: 272

Thanks very much folks for the information

« Back · 1 · 2 · Next »
 You need to be a member to post comments on this forum.

Sign In

 Keep me logged in.
Do not tick box on a computer with public access.