Cabinet Repairs

Forum home - Go back to Cabinet Repairs

Kriesler 6 Multisonic 11-98
« Back · 1 · Next »
Return to top of page · Post #: 1 · Written at 4:04:11 PM on 2 March 2026.
	Clothesdwyer Location: Melbourne, VIC Member since 2 March 2026 Member #: 2771 Postcount: 1
Hi all! As the title says, I have a Kriesler 6 Multisonic 11-98 Stereogram and would dearly appreciate any information regarding it as well as the wood finish and tips for repairing the cabinetry as pictured. The burn mark is what I care to repair the most as opposed to other marks. https://imgur.com/a/y0hxhbg https://imgur.com/a/Pi2LMtp Thank you in advance! What this community has brought together here is a marvel!

Return to top of page · Post #: 2 · Written at 5:17:39 PM on 2 March 2026.
	STC830 Location: NSW Member since 10 June 2010 Member #: 681 Postcount: 1406
If 11-98 is searched in Search Forums, this https://vintage-radio.com.au/default.asp?f=search comes up. Should be a good start. Kevin Chant doesn't have a circuit, but somebody here will. Look through Vintage Fred contributions in this forum for material on cabinet finish repairs. Good luck.

Return to top of page · Post #: 3 · Written at 7:46:27 PM on 2 March 2026.
	GTC Location: Sydney, NSW Member since 28 January 2011 Member #: 823 Postcount: 6945
Multisonics were good performers. Use Control Panel in the top menu bar to un-hide your email address and I'll send you schematic and service notes.

Return to top of page · Post #: 4 · Written at 7:07:44 PM on 16 March 2026.
	GTC Location: Sydney, NSW Member since 28 January 2011 Member #: 823 Postcount: 6945
clothesdwyer: did you see my post above?

Return to top of page · Post #: 5 · Written at 5:34:55 PM on 17 March 2026.
	Ian Robertson Location: Belrose, NSW Member since 31 December 2015 Member #: 1844 Postcount: 2706
This is the guy you should pay attention to! https://vintage-radio.com.au/default.asp?f=14&th=27 And look for his other posts Unfortunately Pete is no longer with us, but his wisdom on the subject remains.

Return to top of page · Post #: 6 · Written at 3:30:43 PM on 18 March 2026.
	GTC Location: Sydney, NSW Member since 28 January 2011 Member #: 823 Postcount: 6945
Unfortunately Pete is no longer with us I trust that just means no longer on this site.

Return to top of page · Post #: 7 · Written at 4:53:33 PM on 19 March 2026.
	Ian Robertson Location: Belrose, NSW Member since 31 December 2015 Member #: 1844 Postcount: 2706
Well I've been unable to contact him for over 12 months. That is unusual. Might have to take a drive to Albury.

Return to top of page · Post #: 8 · Written at 10:13:02 PM on 19 March 2026.
	GTC Location: Sydney, NSW Member since 28 January 2011 Member #: 823 Postcount: 6945
Well I've been unable to contact him for over 12 months. That is unusual. Might have to take a drive to Albury. As I guess you know, his wife is from overseas. Perhaps he has moved there. I hope he's OK.

« Back · 1 · Next »
You need to be a member to post comments on this forum.

Cabinet Repairs

Sign In