Just listed on EBay 1958 HMV Model F3-02 on 360 degree swivel legs
|
|
|
|
Administrator
Location: Naremburn, NSW
Member since 15 November 2005
Member #: 1
Postcount: 7300
|
A lot of houses build on steep blocks had them. The occupiers of such houses are very lucky. The 'granny flats' are a perfect place to display radios and also have a bit set aside with a workbench for mending the chassis, providing that rising damp isn't an issue.
‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾
A valve a day keeps the transistor away...
|
|
|
|
Location: Albury, NSW
Member since 2 July 2017
Member #: 2134
Postcount: 172
|
Yes basements aren't common in Australia.
Those people that have them are very lucky
As you say a great storage place for TV's & Radios as long as dampness isn't an issue.
A lot of our American friends have basements
|
|
|
|
Location: Melbourne, VIC
Member since 20 September 2011
Member #: 1009
Postcount: 1182
|
GTC I'm sure that a hearing aid was available as an accessory for these HMV TV's
Yes there was. Deaf aid attachment type RC/2 selling for £3/15/-
|
|
|
|
Location: Albury, NSW
Member since 1 May 2016
Member #: 1919
Postcount: 2048
|
Yes, the house is built of bricks high off the ground so I have a huge walk in area under the house where I can stand up under there..
But I won't lie ,it's full of stuff! TVs , Radiograms,boxes ,furniture , large drill press and tools .... No room left to even hide a body !
Pete
|
|
|
|
Location: Albury, NSW
Member since 2 July 2017
Member #: 2134
Postcount: 172
|
I would kill for that storage space Pete 😂
|
|
|
|
Location: Albury, NSW
Member since 1 May 2016
Member #: 1919
Postcount: 2048
|
Yes I was very lucky when I found this old house ,It ticked all the boxes . Old run-down ,But original! storage ! big yard !
I would never go back to living in Sydney or Melbourne, Happy to live here and just visit those places from time to time.....
It's not set up yet thoug.,Most of my stuff is in storage until I can finish the house off a bit more . Wainting on my lounge parts coming from the UK too
Have you got room to build or put a shed up in your yard steve ? You have that good Garage though! whats the rough cost of a container in Town ?
Pete
|
|
|
|
Location: Albury, NSW
Member since 2 July 2017
Member #: 2134
Postcount: 172
|
Lounge parts from the UK ??
Yeah I could fit a shed on this block
|
|
|
|
Location: Albury, NSW
Member since 1 May 2016
Member #: 1919
Postcount: 2048
|
Yes I have rare lounge from 1960 and It needed Re springing ,Which Ive done but I needed some very Rare clips which I finally tracked down in London so I have bought those and they're on the way , Its 1960 Contemporary 3 Piece lounge, Fabric is still all original. Actually my wife found the clips . I had all but given up and thought, Hell here's another thing I have to make !,, But then Venie found them in London
Put up a Shed steve ,,But not a Tin Garden shed as they get moisture in them and not so good for storing.
|
|
|
|
Location: Albury, NSW
Member since 2 July 2017
Member #: 2134
Postcount: 172
|
Would love to see this lounge.....sounds interesting !
|
|
|
You need to be a member to post comments on this forum.
|